HPE Aruba Networking J9775A 2530 48G Switch

HPE Aruba 2530 48G Switch (J9775A)

The HPE Aruba 2530 48G Switch is a fully managed Layer 2 switch that provides reliable and secure connectivity for small to medium-sized businesses and branch offices. With 48 Gigabit Ethernet ports and 4 SFP uplinks, it ensures high-speed performance and scalability. This cost-effective switch is easy to deploy and manage with HPE Aruba AirWave or HPE Aruba Central.

Key Features:

• 48 x Gigabit Ethernet Ports: Ensures fast, stable, and secure connectivity for users and devices.

• 4 x Gigabit SFP Uplinks: Flexible fiber uplinks expand your network reach.

• Advanced Layer 2 Switching: Supports VLANs, QoS, and sFlow for efficient traffic segmentation and monitoring.

• Secure Networking: Includes 802.1X, ACLs, and MAC-based authentication to safeguard your infrastructure.

• Energy-Efficient Design: IEEE 802.3az compliance reduces power consumption during idle periods.

---

Technical Overview:

• Recommended for: Small to medium-sized businesses, branch offices, and classrooms.

• Ports: 48 x 10/100/1000 Mbps RJ-45 autosensing ports, 4 x Gigabit SFP uplink ports.

• Switching Capacity: 104 Gbps.

• Forwarding Rate: 77.3 Mpps.

• Latency: <7.4 µs (100 Mb), <2.3 µs (1 Gb).

• Management: Aruba Central, AirWave, CLI, Web GUI, SNMP.

• Security: 802.1X authentication, Access Control Lists (ACLs), MAC authentication.

• Energy Efficiency: IEEE 802.3az Energy Efficient Ethernet.

• Operating Range: 0°C to 45°C; up to 10,000 ft (3 km).

• Power Consumption: Max 59.5 W; Idle 29.5 W.

• Dimensions/Weight: 44.3 x 25.4 x 4.45 cm (17.44 x 10.00 x 1.75 in); 3.08 kg (6.8 lb).

---

You can check the related tab for the HPE Aruba 2530 48G Switch (J9775A) datasheet.

Properties	HPE Aruba J9775A 2530-48G Switch
Description	Switch, managed, 48 x 10/100/1000 + 4 x Gigabit SFP, rack-mountable, wall-mountable, horizontal surface mounting
Product Family	2530 Switch Series
Product Type	Ethernet Switch
I/O ports and slots	48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
	4 fixed Gigabit Ethernet SFP ports
Additional ports and slots	1 dual-personality (RJ-45 or USB micro-B) serial console port
Electrical characteristics
Frequency	50/60 Hz
Voltage	100-127 / 200-240 V ac
Current	1.2/0.7 A
Maximum heat dissipation	203 BTU/hr (214.17 kJ/hr)
Maximum power rating	59.5 W
Idle power	29.5 W
Dimension	17.44(w) x 10.00(d) x 1.75(h) in (44.3 x 25.4 x 4.45 cm) (1U height)
Weight	6.8 lb (3.08 kg)
Mounting and enclosure	Mounts in an EIA-Standard 19-inch telco rack or equipment cabinet (rack-mounting kit included) Horizontal surface mounting; Wall mounting

Specifications	HPE Aruba J9775A 2530-48G Switch
Memory and processor	ARM9E @ 800 MHz, 128 MB flash; Packet buffer size: 3 MB dynamically allocated, 256 MB DDR3 DIMM
Performance (IPv6 Ready Certified)
100 Mb Latency	< 7.4 µs (LIFO 64-byte packets)
1000 Mb Latency	< 2.3 µs (LIFO 64-byte packets)
Throughput	up to 77.3 Mpps (64-byte packets)
Switching capacity	104 Gb/s
MAC address table size	16000 entries
Management	IMC - Intelligent Management Center; command-line interface (CLI); Web browser; configuration menu; out-of-band management (Serial RS-232C or Micro-USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
Operating temperature	0° to 45°C (32° to 113°F)
Operating relative humidity	15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	15% to 90% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft (3 km)
Acoustic	Power: 31.0 dB, Pressure: 34.5 dB
Safety	UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
Emissions	FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity	Generic: EN 55024, CISPR 24 ESD: IEC 61000-4-2 Radiated: IEC 61000-4-3 EFT/Burst: IEC 61000-4-4 Surge: IEC 61000-4-5 Conducted: IEC 61000-4-6 Power frequency magnetic field: IEC 61000-4-8 Voltage dips and interruptions: IEC 61000-4-11 Harmonics: EN 61000-3-2, IEC 61000-3-2 Flicker: EN 61000-3-3, IEC 61000-3-3

INTERNATIONAL -

International buyers must acknowledge that all duties and taxes are their sole responsibility and Network Devices Inc is not held responsible for possible additional charges.

DOMESTIC -

Products are shipped Monday through Friday via UPS/FedEx/USPS. The estimated delivery time is 1-6 business days depending on location. If “Free Shipping” is offered, it will be by Ground only and within USA Continental States Only (48 States). There will be a surcharge on shipments to Hawaii, Alaska, Puerto Rico and APO/FPO addresses. After you have made a purchase, the surcharge will be calculated using the parcel’s weight and size. Network Devices Inc ships the product the same day of receiving an order. Otherwise you will a receive notification of delay or cancellation of said order.