Specifications |
AXIS V5938 60 Hz PTZ Network Camera |
Camera |
Image sensor |
Progressive scan RGB CMOS 1/2.5" |
Lens |
4.4–88 mm, F2.0-3.8 |
Horizontal field of view: 70.2°–4.1° |
Vertical field of view: 39.5°–2.3° |
Autofocus, P-iris contro |
Day and night |
Automatically removable infrared-cut filter |
Minimum illumination |
Color: |
0.7 lux at 30 IRE F2.0 |
1 lux at 50 IRE F2.0 |
B/W: |
0.06 lux at 30 IRE F2.0 |
0.1 lux at 50 IRE F2.0 |
Shutter speed |
1/10000 s to 1 s |
Pan/Tilt/Zoom |
Pan: ±170°, 0.2-100°/s |
Tilt: -20° - 90°, 0.2-90°/s |
Zoom: 20x Optical, 12x Digital, Total 240x |
256 presets positions, Control queue, On-screen directional |
indicator, Adjustable zoom speed, PTZ response profiles |
System on chip (SoC) |
Model |
ARTPEC-7 |
Memory |
2 GB RAM, 512 MB Flash |
Video |
Video compression |
H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles |
H.265 (MPEG-H Part 2/HEVC) Main Profile |
Motion JPEG |
Resolution |
3840x2160 HDTV 2160p to 160x90 |
HDMI Output: |
2160p@25/30 fps (50/60 Hz) |
1080p@25/30/50/60 fps (50/60 Hz) |
1080i@50/60 fps (50/60 Hz) |
720p@50/60 fps (50/60 Hz) |
480p@60 fps (60 Hz) |
SDI Output: |
1080p@25/30/50/60 fps (50/60 Hz) |
1080p@50/60 fps (50/60 Hz) dual stream |
1080i@50/60 fps (50/60 Hz) |
720p@50/60 fps (50/60 Hz) |
Frame rate |
Up to 30/25 fps (60/50 Hz) in 4K |
Up to 60/50 fps (60/50 Hz) in all other resolutions |
Video streaming |
Multiple, individually configurable streams in H.264, H.265 and |
Motion JPEG |
Axis Zipstream technology in H.264 and H.265 |
Controllable frame rate and bandwidth |
VBR/ABR/MBR H.264/H.265 |
HDMI |
HD-SDI: SMPTE 292 |
3G-SDI: SMPTE 424 ,SMPTE 425 (3G-SDI mapping supports |
Level A / Level B dual link mapping) |
Image settings |
Saturation, brightness, sharpness, noise reduction, rotation: |
0°, 180°, WDR – dynamic contrast, white balance, day/night |
threshold, exposure zones, backlight compensation, defogging, |
highlight compensation, electronic image stabilization |
Audio |
Audio streaming |
Two-way, stereo |
HD-SDI: SMPTE ST 299-1 |
3G-SDI: SMPTE ST 299-2 |
Audio encoding |
SDI: AES3 24 bit, 48 kHz |
HDMI: LPCM |
Network: AAC LC 8/16/32/44.1/48 kHz, G.711 PCM 8 kHz, |
G.726 ADPCM 8 kHz, Opus 8/16/48 kHz, LPCM 48 kHz, |
Configurable bit rate |
XLR input |
2 balanced inputs (left/right) |
Microphone phantom power 48 V |
Balanced external microphone |
Balanced line level |
Line input impedance: >10 kOhm |
Maximum input level: 4.4 Vrms |
Bandwidth: 20 Hz - 20 kHz (±3 dB), may be limited by sample rate |
THD+N: < 0.03% |
Signal-to-Noise ratio: > 85 dB @ 0 |
dB gain, > 78 dB @ 30 dB gain |
3.5 mm input |
Microphone Power 5 V via 2.2 kOhm |
Unbalanced external microphone |
Unbalanced line |
Line input impedance: >10 kOhm |
Maximum input level: 2.2 Vrms |
Bandwidth: 20 Hz - 20 kHz (±3 dB), may be limited by sample |
rate |
THD+N: < 0.03% |
Signal-to-Noise ratio: > 87 dB @ 0 dB gain, > 83 dB @ |
30 dB gain |
3.5 mm output |
3.5 mm unbalanced stereo output |
Output impedance: < 100 Ohm, short circuit proof |
Maximum output level: > 0.707 Vrms |
Bandwidth: 20 Hz - 20 kHz (±3 dB), may be limited by sample |
rate |
THD+N: < 0.03% @ 10 kOhm load |
Signal-to-Noise ratio: > 87 dB |
SDI output |
Bandwidth: 20 Hz - 20 kHz (±3 dB) |
THD+N: < 0.03% |
Signal-to-Noise ratio: > 87 dB |
HDMI output |
Bandwidth: 20 Hz - 20 kHz (±3 dB) |
THD+N: < 0.03% |
Signal-to-Noise ratio: > 87 dB |
Network |
Security |
Password protection, IP address filtering, HTTPS* encryption, IEEE 802.1x (EAP-TLS)* network access control, digest authentication, user access log, centralized certificate |
management, brute force delay protection, signed firmware, secure boot |
*: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (openssl.org), and cryptographic software written by Eric Young |
Supported protocols |
IPv4/v6, ICMPv4/ICMPv6, HTTP, HTTP/2, HTTPS* , SSL/TLS* , QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnPTM, SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCPv4/v6, ARP, SOCKS, SSH, SIP, LLDP, CDP, MQTT, Syslog, Link-Local address (ZeroConf), HDMI, 3G-SDI, VISCA |
*: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (openssl.org), and cryptographic software written by Eric Young |
System Integration |
Application Programming Interface |
Open API for software integration, including VAPIX® and |
AXIS Camera Application Platform; specifications at axis.com |
One-click cloud connection |
ONVIF® Profile G and ONVIF® Profile S, specification at onvif.org |
Support for Session Initiation Protocol (SIP) for integration with |
Voice over IP (VoIP) systems, peer-to-peer or integrated with |
SIP/PBX. |
Event conditions |
Analytics, external input, edge storage events, virtual inputs |
through API |
Audio: audio detection |
Call: state, state change |
Device status: above operating temperature, above or below |
operating temperature, below operating temperature, IP address |
removed, network lost, new IP address, storage failure, system |
ready, within the operating temperature |
Edge storage: recording ongoing, storage disruption |
I/O: digital input, manual trigger, virtual input |
MQTT subscribe |
PTZ: PTZ malfunctioning, PTZ movement, PTZ preset position |
reached, PTZ ready |
Scheduled and recurring: scheduled event |
Video: average bitrate degradation, live stream open |
Event actions |
MQTT publish |
Record video: SD card and network share |
Upload of images or video clips: FTP, SFTP, HTTP, HTTPS, network |
share and email |
Pre- and post-alarm video or image buffering for recording or |
upload |
Notification: email, HTTP, HTTPS, TCP and SNMP trap |
PTZ: PTZ preset |
Overlay text, external output activation, play audio clip, zoom |
preset, day/night mode, make call |
Data streaming |
Event data |
Built-in installation aids |
Pixel counter, leveling guide |
Analytics |
Applications |
Included |
AXIS Video Motion Detection, AXIS PTZ Autotracking |
Support for AXIS Camera Application Platform enabling |
installation of third-party applications, see axis.com/acap |
General |
Casing |
ASA plastic cover |
Color: White NCS S 1002-B |
Power |
11–13 V DC (12 V power supply included), typical 17.5 W, |
max 20 W |
Connectors |
RJ45 10BASE-T/100BASE-TX/1000BASE-T |
Terminal block for 1 alarm input and 1 output |
3.5 mm stereo mic/line in, 3.5 mm stereo line out |
XLR-3 (left + right) mic/line in (with 48 V phantom power) |
HDMI Type A, BNC for SDI |
DC input |
RS232 serial connector for VISCA |
Storage |
Support for SD/SDHC/SDXC card |
Support for SD card encryption (AES-XTS-Plain64 256bit) |
Recording to network-attached storage (NAS) |
For SD card and NAS recommendations see axis.com |
Operating conditions |
0 °C to 40 °C (32 °F to 104 °F) |
Humidity 10-85% RH (non-condensing) |
Storage conditions |
(-40 °C to 65 °C) (-40 °F to 149 °F) |
Humidity 5 - 95% RH (non-condensing) |
Approvals |
EMC |
EN 55032 Class A, EN 55024, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, |
FCC Part 15 Subpart B Class A, ICES-3(A)/NMB-3(A), |
VCCI Class A, RCM AS/NZS CISPR 32 Class A, CISPR 24, CISPR 35, |
KC KN32 Class A, KC KN35 |
Safety |
IEC/EN/UL 62368-1, CAN/CSA C22.2 No. 62368-1, KC-Markk, IS 13252 |
Environment |
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2 78 |
Network |
NIST SP500-267 |
Dimensions |
Height: 180 mm (7.1 in) |
ø 136 mm (5.4 in) |
Weight |
Zoom: 15.1 kg (33.3 lb) |
Included accessories |
Power supply, wall/ceiling mount, terminal connector for I/O, |
installation guide, Windows® |
decoder user license, Camstreamer |
3-month trial |
Languages |
English, German, French, Spanish, Italian, Russian, Simplified |
Chinese, Japanese, Korean, Portuguese, Traditional Chinese |