Cisco Aironet 3800 Series Access Points

Show on page:
  • Cisco AIR-AP3802I-B-K9 Access Point - Network Devices Inc.
    Save $1,751.09

    CISCO AIR-AP3802I-B-K9 ACCESS POINT

    CISCO AIR-AP3802I-B-K9 ACCESS POINT

    $850.00
    $2,601.09

    • Wireless access point
    • 802.11ac Wave 2
    • Wi-Fi
    • Dual Band
    • Internal Antenna


    Cisco AIR-AP3802I-B-K9 Access Point Technical Specification

     

    Detail 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Mod, Internal Antenna, mGig, B Regulatory Domain
    Regulatory Domain B (B regulatory domain):
    - 2.412 to 2.462 GHz; 11 channels
    - 5.180 to 5.320 GHz; 8 channels
    - 5.500 to 5.720 GHz; 12 channels
    - 5.745 to 5.825 GHz; 5 channels
    Software and supported wireless LAN controllers Cisco Unified Wireless Network Software Release 8.2.MR1 or later
    Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
    Cisco IOS XE Software Release 16.3 - Target Q3 CY2016
    Cisco Catalyst 3850 Series and 3650 Series Switches
    802.11n version 2.0 (and related) capabilities 4x4 MIMO with three spatial streams
    Maximal ratio combining (MRC)
    802.11n and 802.11a/g beamforming
    20- and 40-MHz channels
    PHY data rates up to 450 Mbps (40 MHz with 5 GHz).
    Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
    802.11 dynamic frequency selection (DFS)
    Cyclic shift diversity (CSD) support
    802.11ac Wave 1 capabilities 4x4 MIMO with three spatial streams
    MRC
    802.11ac beamforming
    20-, 40-, and 80-MHz channels
    PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
    Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
    802.11 DFS
    CSD support
    802.11ac Wave 2 capabilities 4x4 MU-MIMO with three spatial streams
    MRC
    802.11ac beamforming
    20-, 40-, 80, 160-MHz channels
    PHY data rates up to 5.2 Gbps
    Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
    802.11 DFS
    CSD support
    Integrated antenna Flexible radio (either 2.4 GHz or 5 GHz)
    2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
    5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90
    Dedicated 5-GHz radio
    5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
    Interfaces 2 Ethernet ports
    100/1000/2500/5000 Multigigabit Ethernet (RJ-45) - IEEE 802.3bz
    CAT 5e cabling
    Higher-quality 10GBASE-T (CAT 6/6a) cabling
    100/1000BASE-T autosensing (RJ-45 - AUX port)
    Management console port (RJ-45)
    Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
    Dimensions (W x L x H) 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm),
    Weight 4.6 lb (2.09 kg)
    Input power requirements 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE)
    802.3at power injector (AIR-PWRINJ6=)
    50W power supply (AIR-PWR-50=)
    Power draw 30W at the PSE with all features enabled except for the USB 2.0 port
    34W at the PSE with the USB 2.0 port enabled
    Environmental Cisco Aironet 3800i
    Nonoperating (storage) temperature: -22 to 158F (-30 to 70C)
    Nonoperating (storage) altitude test: 25C, 15,000 ft.
    Operating temperature: 32 to 104F (0 to 40C)
    Operating humidity: 10% to 90% percent (noncondensing)
    Operating altitude test: 40C, 9843 ft.
    System memory 1024 MB DRAM
    256 MB Flash

     

    Set up Flexible & Versatile Work Environment with Cisco AIR-AP3802I-B-K9

    Cisco AIR-AP3802I-B-K9 Access Point is built on the 802.11ac Wave 2 standard and features ultimate flexibility and versatility. Especially suitable for large enterprises with Wi-Fi dependency for customer engagement, the 3800 series access point is a hands-off product and intelligent enough to understand end-device activities and usage. This automation ensures smooth performance of Wi-Fi network with full potential. 

    Key Benefits of Cisco AIR-AP3802I-B-K9

    The Aironet 3800 Series access point has optimum capabilities and power to manage growth, capacity and coverage gaps in dense indoor environments. 

     

    Product Code AIR-AP3802I-B-K9
    Antennas Internal Antennas
    Interfaces -2 Ethernet ports   
    -100/1000/2500/5000 Multigigabit Ethernet (RJ-45)
    -CAT 5e cabling
    -Higher-quality 10GBASE-T (CAT 6/6a) cabling
    -100/1000BASE-T autosensing (RJ-45 - AUX port)
    -Management console port (RJ-45)
    Features -4x4 MU-MIMO with three spatial streams
    -MRC
    -802.11ac beamforming
    -20-, 40-, 80, 160-MHz channels
    -PHY data rates up to 5.2 Gbps
    -Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
    -802.11 DFS
    -CSD support
    Regulatory Domain B (B regulatory domain):
    - 2.412 to 2.462 GHz; 11 channels
    - 5.180 to 5.320 GHz; 8 channels
    - 5.500 to 5.720 GHz; 12 channels
    - 5.745 to 5.825 GHz; 5 channels
    System - 1024 MB DRAM
    - 256 MB flash
    Dimensions (W x L x H) 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm)

     

    quick view
    Availability: SPECIAL ORDER
    $2,601.09
    $850.00
    quick view
  • Cisco AIR-AP3802I-B-K9C Access Point - Network Devices Inc.
    Sold Out

    CISCO AIR-AP3802I-B-K9C WIRELESS ACCESS POINT

    CISCO AIR-AP3802I-B-K9C WIRELESS ACCESS POINT

    $651.00
    $1,695.00

    • Wireless Access Point
    • 802.11ac Wave 2
    • 802.11a/b/g/n/ac Wave 2
    • Dual Band
    • Internal Antenna
    • Configurable


    Type Wireless access point
    Form Factor External
    Connectivity Technology Wireless
    Data Transfer Rate 5.2 Gbps
    Data Link Protocol IEEE 802.11a, IEEE 802.11ac Wave 2, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
    Compliant Standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad (LACP)
    Status Indicators Boot state, Error, Status
    Features 4T4R MIMO technology, Auto-sensing per device, Beamforming technology, CleanAir technology, ClientLink 4.0 technology, Cross AP Noise Reduction, Cyclic shift diversity (CSD), DFS support, High Density Experience (HDX), Link Aggregation Control Protocol (LACP), Maximum Ratio Combining (MRC), MU-MIMO technology, Optimized AP Roaming, Packet aggregation A-MPDU, Packet aggregation A-MSDU
    Wireless Protocol 802.11a/b/g/n/ac Wave 2
    Power Over Ethernet (PoE) PoE
    Wi-Fi Bands 2.4 GHz, 5 GHz
    Qty 1
    Type Management
    Connector Type RJ-45
    Antenna Form Factor Internal
    Compatibility PC
    Manufacturer Cisco Systems
    Packaged Quantity 1
    Product Line Cisco Aironet
    Model 3802I (Config)
    Brand Cisco
    Type Cisco Unified Wireless Network Software Release 8.2.MR1 or later
    Type Spatial streams
    Value 3
    Width 8.7 in
    Depth 8.7 in
    Height 2.5 in
    Ruggedized Design Indoor

     


     

     

    For organizations paving the way for the 802.11ac Wave 2 standard, the Cisco Aironet 3800 Series is the perfect solution. The access points go beyond getting ready for the changing standards, providing the ultimate in flexibility and versatility. For large enterprise organizations that rely on Wi-Fi to engage with customers, the 3800 Series is a hands-off product that's intelligent enough to make decisions based on end-device activities and usage. This automation allows you to devote time to other pressing matters, secure in the knowledge that your Wi-Fi network is performing to its utmost potential. The Aironet 3800 Series is packed with the features and capabilities that have made Cisco the industry leader, at a price point that is ideal for managing wireless growth, capacity, and coverage gaps in dense indoor environments.

     

    Cisco AIR-AP3802I-B-K9C Access Point Overview

     

    Description 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Mod, Internal Antenna, mGig, B Regulatory Domain, Configurable
    Features 4x4 MU-MIMO with three spatial streamsMRC802.11ac beamforming20-, 40-, 80, 160-MHz channels PHY data rates up to 5.2 GbpsPacket aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)802.11 DFSCSD support
    Interfaces 2 Ethernet ports100/1000/2500/5000 Multigigabit Ethernet (RJ-45)CAT 5e calling higher-quality 10GBASE-T (CAT 6/6a) cabling100/1000BASE-T autosensing (RJ-45 - AUX port)Management console port (RJ-45)
    Dimensions (W x L x H) 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm)
    Weight 4.6 lb (2.09 kg)
    Availability: Out Of Stock
    $1,695.00
    $651.00
  • Cisco AIR-AP3802E-B-K9 Access Point - Network Devices Inc. Cisco AIR-AP3802E-B-K9 Access Point - Network Devices Inc.
    Sold Out

    CISCO AIR-AP3802E-B-K9 ACCESS POINT

    CISCO AIR-AP3802E-B-K9 ACCESS POINT

    $752.76
    $2,561.00
    • Wireless access point
    • 802.11ac Wave 2
    • Wi-Fi
    • Dual Band
    • External Antenna (Sold Separately)

    Cisco AIR-AP3802E-B-K9 Access Point Technical Specifications

     

    External Antenna (sold separately)
    • 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
    • Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
    Smart Antenna Connector
    • Requires the AIR-CAB002-DART-R 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
    • Required when running the flexible radio as either a:

               - Second 5-GHz serving radio

               - Wireless Security Monitoring radio 

    Interfaces
    • 2 Ethernet Ports
    • 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) - IEEE 802.3bz

                  - CAT 5e cabling

                  - Higher-quality 10GBASE-T (CAT 6/6a) cabling

    • 100/1000BASE-T autosensing (RJ-45 - AUX port)
    • Management console port (RJ-45)
    Indicators
    • Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
    Dimensions (W x L x H)
    • Access point: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)  (without mounting brackets)
    Weight
    • 4.6 lb (2.09 kg)
    Input Power Requirements
    • 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE)
    • 802.3at power injector (AIR-PWRINJ6)
    • 50W power supply (AIR-PWR-50)
    Power Draw
    • 25.8W at the PSE (22.5W at the PD) with all features enabled except for the USB 2.0 port
    • 30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled

     

    Efficient Wireless Cisco Air-Ap3802e-B-K9 Access Point

    Cisco Air-Ap3802e-B-K9 Access Point is high-speed and dual-band networking equipment. With 802.11ac Wave 2 and 802.11a/b/g/n/ac Wave 2 LAN technology, this access point ensures efficient wireless connectivity. 

    Key Benefits of Cisco Air-Ap3802e-B-K9 Access Point

    Cisco Air-Ap3802e-B-K9 Access Point provides a fast connection with a 5.2 GBPS data transfer rate. This dual-band access point has 4T4R MIMO technology, auto-sensing, Beamforming, CleanAir, ClientLink 4.0, cross AP noise reduction, optimized AP roaming capability and is, therefore, an ideal choice for demanding office environments.  

    Approved External Antennas For Use With 3802E

    Availability: Out Of Stock
    $2,561.00
    $752.76
  • Cisco AIR-AP3802E-B-K9C Access Point - Network Devices Inc.
    Sold Out

    CISCO AIR-AP3802E-B-K9C ACCESS POINT

    CISCO AIR-AP3802E-B-K9C ACCESS POINT

    $619.00
    $1,795.00
    • Wireless access point
    • 802.11ac Wave 2
    • Wi-Fi
    • Dual Band
    • Configurable
    • External Antenna (Sold separately)

    Type Wireless access point
    Form Factor External
    Connectivity Technology Wireless
    Data Transfer Rate 5.2 Gbps
    Data Link Protocol IEEE 802.11a, IEEE 802.11ac Wave 2, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
    Compliant Standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad (LACP)
    Status Indicators Boot state, Error, Operation mode, Status
    Features 4T4R MIMO technology, Auto-sensing per device, Beamforming technology, CleanAir technology, Cross AP Noise Reduction, Cyclic shift diversity (CSD), DFS support, High Density Experience (HDX), Link Aggregation Control Protocol (LACP), Maximum Ratio Combining (MRC), MU-MIMO technology, Optimized AP Roaming, Packet aggregation A-MPDU, Packet aggregation A-MSDU
    Wireless Protocol 802.11a/b/g/n/ac Wave 2
    Wi-Fi Bands 2.4 GHz, 5 GHz
    Qty 1
    Type 1000Base-T (management)
    Connector Type RJ-45
    Included Accessories Ceiling mounting kit, Mounting brackets
    Antenna Qty 4
    Antenna Form Factor External detachable
    Compatibility PC 
    Manufacturer Cisco Systems
    Packaged Quantity 1
    Product Line  Cisco Aironet
    Model  3802E
    Brand Cisco
    Capacity Type Spatial streams 
    Width 8.7 in
    Depth 8.7 in
    Height  2.6 in
    Ruggedized Design  Indoor 

     

     

     

    High-speed Dual-band Cisco Air-Ap3802e-B-K9c Access Point

    Cisco Air-Ap3802e-B-K9c Access Point offers a high-speed, dual-band networking solution. This access point is especially useful for efficient wireless connectivity that is ensured with 802.11ac Wave 2 and 802.11a/b/g/n/ac Wave 2 LAN technology. 

    Key Benefits of Cisco Air-Ap3802e-B-K9c Access Point

    Cisco Air-Ap3802e-B-K9c Access Point is built to provide a fast connectivity with a 5.2 GBPS data transfer rate. This dual-band access point is the perfect choice for demanding office environments which have requirements for 4T4R MIMO technology, auto-sensing, Beamforming, CleanAir, ClientLink 4.0, cross AP noise reduction, optimized AP roaming.

     

    Approved External Antennas For Use With 3802E

    Availability: Out Of Stock
    $1,795.00
    $619.00
  • Cisco AIR-PWR-50= Power Supply - Network Devices Inc.
    Sold Out

    CISCO AIR-PWR-50= POWER SUPPLY

    CISCO AIR-PWR-50= POWER SUPPLY

    $124.16
    • Power Supply
    • AC 100-240 V
    • 50 Watt
    • 802.3bt uPoE
    • For Aironet 3800 series

    Cisco Air-Pwr-50= Power Supply for All Access Point Power Supply Needs

    Cisco Air-Pwr-50= Power Supply works as a spare for power supply needs of access point. 

    Key Benefits of Cisco Air-Pwr-50= Power Supply

    Cisco Air-Pwr-50= Power Supply delivers solutions as an external power supply and operates at an AC voltage of 100 – 240 volts. It provides a power of 50 watts and is compatible with Cisco Aironet 3800 series access points.

    Availability: Out Of Stock
    $124.16
Show on page:
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Checkout