JUNIPER NFX350-S2-AC FIREWALL

Specifications

Specifications	NFX350-S2-AC
CPU	Intel 12 Core SKYLAKE
Memory	64 GB DDR4
Storage	100 GB SSD
Software	Wind River Linux 8
Managed Secure Router	20 Gbps
Managed Security	20 Gbps
IPSec	5 Gbps
Maximum number of VNFs	10
Wireless/LTE Module option	LTE Module
LTE antenna support	LTE Module
LTE chipset	Sierra Wireless Modem MC7430 MC7455
LTE bands/regions supported	LTE modem with support for 1-5, 7-8, 12-13, 30, 25-26, 29-30, 41 LTE bands (for North America and Europe)
Software Specifications
Packet Switching Capacities	Packet Forwarding Engine (PFE) capacity: 64 Gbps VNF capacity: 20 Gbps full-duplex path to CPU for VNF traffic Throughput via VNFs will vary depending on network function and acceleration technologies supported
Layer 2 Switching	Maximum media access control (MAC) addresses in hardware: up to 16,000‡ Jumbo frames: 9216 bytes‡ Number of VLANs: up to 1024 (VLAN IDs: 4096)‡ Port-based VLAN MAC-based VLAN Voice VLAN Private VLAN (PVLAN) Number of MST instances supported: 64 Compatible with Per-VLAN Spanning Tree Plus (PVST+) Routed VLAN interface (RVI)‡ Link Layer Discovery Protocol–Media Endpoint Discovery (LLDP-MED) with VoIP integration
Routing Protocols	IPv4, IPv6, ISO, Connectionless Network Service (CLNS) Static routes RIP v1/v2 OSPF/OSPF v3 BGP with Route Reflector Multicast: Internet Group Management Protocol (IGMP) v1/v2, Protocol Independent Multicast (PIM) sparse mode (SM)/dense mode (DM)/source-specific multicast (SSM), Session Description Protocol (SDP), Distance Vector Multicast Routing Protocol (DVMRP), Multicast Source Discovery Protocol (MSDP), Reverse Path Forwarding (RPF) Encapsulation: VLAN, Point-to-Point Protocol (PPP), Frame Relay, High-Level Data Link Control (HDLC), serial, Multilink Point-to-Point Protocol (MLPPP), Multilink Frame Relay (MLFR), and Point-to-Point Protocol over Ethernet (PPPoE) Virtual routers Policy-based routing, source-based routing Equal-Cost Multipath (ECMP)
Threat Defense and Intelligence Services	Intrusion prevention Antivirus Antispam Category/reputation-based URL filtering SecIntel to provide threat intelligence Protection from botnets (command and control) Adaptive enforcement based on GeoIP Juniper Cloud Advanced Threat Prevention to detect and block zeroday malware attacks
High Availability	VRRP Backup link via 3G/4G LTE wireless or other WAN (NFX150) Stateful failover and dual CPE clustering‡ Active/active—L3 mode Active/passive—L3 mode Configuration synchronization Session synchronization firewall and VPN Session failover for routing change Device failure detection, link failure detection IP monitoring with route and interface failover
VPN Features	Tunnels: Generic routing encapsulation (GRE)3, IP-IP3, IPsec Site-site IPsec VPN IPsec crypto algorithms: Data Encryption Standard (DES), triple DES (3DES), Advanced Encryption Standard (AES-256), AES-GCM IPsec authentication algorithms: MD5, SHA-1, SHA-128, SHA-256 Perfect forward secrecy, anti-reply IPv4 and IPv6 IPsec VPN Multiproxy ID for site-site VPN Internet Key Exchange (IKEv1, IKEv2), NAT-T Virtual router and quality-of-service (QoS) aware Standard-based dead peer detection (DPD) support VPN monitoring
Quality of Service (QoS)	Layer 2 QoS Layer 3 QoS Ingress policing: 1 rate 2 color Hardware queues per port: 8 Scheduling methods (egress): Strict priority (SP), shaped-deficit weighted round-robin (SDWRR) 802.1p: DiffServ code point (DSCP)/IP precedence trust and marking L2-L4 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN, IP address, DSCP/IP precedence TCP/UDP port numbers Congestion avoidance capabilities: Tail drop
Multicast	Internet Group Management Protocol (IGMP) snooping entries: 1000 IGMP: v1, v2, v3 IGMP snooping PIM-SM
Services and Manageability	Junos OS CLI Web interface (J-Web) Out-of-band management: Serial, 10/100BASE-T Ethernet ASCII configuration Rescue configuration Configuration rollback Simple Network Management Protocol (SNMP): v1, v2c, v3 Remote monitoring (RMON) (RFC 2819) Groups 1, 2, 3, 9 Network Time Protocol (NTP) DHCP server DHCP client and DHCP proxy DHCP relay and helper RADIUS authentication TACACS+ authentication SSHv2 Secure copy HTTP/HTTPs Domain Name System (DNS) resolver System logging Temperature sensor Configuration backup via FTP/secure copy Interface range
Advanced Routing Services	MPLS (RSVP, LDP) Circuit cross-connect (CCC), translational cross-connect (TCC) L2/L3 MPLS VPN Virtual private LAN service (VPLS), next-generation multicast VPN (NG-MVPN) MPLS traffic engineering and MPLS fast reroute
Application Security Services	Application visibility and control Application-based firewall Application QoS Application-based advanced policy-based routing Application quality of experience (AppQoE)
Access Control Lists (Junos OS Firewall Filters)	Port-based ACL (PACL)—ingress VLAN-based ACL (VACL)—ingress and egress Router-based ACL (RACL)—ingress and egress ACL entries (ACE) in hardware per system: 1500 ACL counter for denied packets ACL counter for permitted packets Ability to add/remove/change ACL entries in middle of list (ACL editing) L2-L4 ACL
Security	MAC limiting Allowed MAC addresses—configurable per port Sticky MAC (persistent MAC address learning) Dynamic ARP inspection (DAI) Proxy ARP Static ARP support Dynamic Host Configuration Protocol (DHCP) snooping
Troubleshooting	Debugging: CLI via console, telnet, or SSH Diagnostics: Show and debug command statistics Traffic mirroring (port) Traffic mirroring (VLAN) ACL-based mirroring Mirroring destination ports per system: 1 LAG port monitoring Multiple destination ports monitored to 1 mirror (N:1) Maximum number of mirroring sessions: 1 Mirroring to remote destination (over L2): 1 destination VLAN IP tools: Extended ping and trace Juniper Networks commit and rollback
Optics	EX-SFP-10GE-USR EX-SFP-10GE-DAC-1M EX-SFP-1GE-SX EX-SFP-1GE-SX-ET EX-SFP-1GE-LX EX-SFP-10GE-SR EX-SFP-10GE-LR EX-SFP-10GE-DAC-3M EX-SFP-10GE-DAC-5M EX-SFP-10GE-ER EX-SFP-10GE-ZR EX-SFP-1GE-LH EX-SFP-1GE-LX40K EX-SFP-GE10KT13R14 EX-SFP-GE10KT14R13 EX-SFP-GE10KT13R15 EX-SFP-GE10KT15R13 EX-SFP-GE40KT13R15 EX-SFP-GE40KT15R13 EX-SFP-GE80KCW1470 EX-SFP-GE80KCW1490 EX-SFP-GE80KCW1510 EX-SFP-GE80KCW1530 EX-SFP-GE80KCW1550 EX-SFP-GE80KCW1570 EX-SFP-GE80KCW1590 EX-SFP-GE80KCW1610
Operating temperature	32° to 104° F (0° to 40° C)
Storage temperature	-40° to 158° F (-40° to 70° C)
Operating altitude	Up to 6500 ft. (2000 m)
Relative humidity operating	5% to 90% (noncondensing)
Relative humidity non-operating	5% to 90% (noncondensing)
Seismic	Designed to meet Zone 4 earthquake requirements
Safety	cNRTL-UL60950-1 (Second Edition) C-UL to CAN/CSA 22.2 No.60950-1 (Second Edition) TUV/GS to EN 60950-1 (Second Edition) CB-IEC60950-1 (Second Edition with all country deviations) EN 60825-1 (Second Edition)
Electromagnetic Compatibility	FCC 47CFR Part 15 Class A EN 55022 Class A ICES-003 Class A VCCI Class A AS/NZS CISPR 32 Class A CISPR 22 Class A, CISPR 32 Class A EN 55024 EN 300386 CE
Environmental Compliance

Properties

Properties	Juniper NFX350-S2-AC
Description	NFX350-S2, 12-core Skylake Xeon-D, QAT, 64GB RAM, 50GB SSD, 2xM2 slots, Dual AC PS capable, single 450W AC PSU, LTE module (2nd PS and LTE module are optional accessories). Includes Junos standard security software license for Layer 2 and Layer 3 services, Network Address Translation (NAT), IP Security (IPsec), and stateful firewall
Product Family	NFX350 Series
Product Type	Security Firewall
Interface Specifications
Integrated network interfaces	8 x 10/100/1000BASE-T RJ-45 LAN or WAN ports 8 x 1GbE/10GbE SFP+ LAN or WAN ports 1 x 10/100/1000BASE-T RJ-45 management port
Network interface module	Not Available
ADSL2/VDSL2 Interface	ADSL2/ADSL2+/VDSL SFP
Out-of-band interfaces	RJ-45 console port Mini USB console port 2 x USB 3.0 port
Footprint	Rack mount
Rack units (U)	1 U
Dimensions (WxHxD)	1.72 x 17.32 x 20.86 in (4.37 x 44.0 x 53.0 cm)
Weight	18.6 lb (8.45 kg)
Power supply	650W hot-swappable AC-DC
Airflow/cooling	Front-to-back (AFO) forced cooling
Acoustic noise level	61 dBA

INTERNATIONAL -

International buyers must acknowledge that all duties and taxes are their sole responsibility and Network Devices Inc is not held responsible for possible additional charges.

DOMESTIC -

Products are shipped Monday through Friday via UPS/FedEx/USPS. The estimated delivery time is 1-6 business days depending on location. If “Free Shipping” is offered, it will be by Ground only and within USA Continental States Only (48 States). There will be a surcharge on shipments to Hawaii, Alaska, Puerto Rico and APO/FPO addresses. After you have made a purchase, the surcharge will be calculated using the parcel’s weight and size. Network Devices Inc ships the product the same day of receiving an order. Otherwise you will a receive notification of delay or cancellation of said order.