Cisco IE 1000 IE-1000-4P2S-LM 4-Port PoE+ Industrial Ethernet DIN-Rail Switch with 2x 1G SFP

Yes. The Cisco IE-1000-4P2S-LM supplies IEEE 802.3af PoE and 802.3at PoE+ across its four 10/100 Fast Ethernet copper ports, drawing from a shared 120 W PoE power budget. That budget powers a mix of industrial powered devices such as ruggedized IP cameras, industrial wireless access points, and networked sensors; the exact number of devices depends on each device's power draw. If you need more PoE capacity, the IE-1000-8P2S-LM provides eight PoE/PoE+ ports and a 180 W budget.

The Cisco IE-1000-4P2S-LM has two Gigabit SFP fiber uplink ports that accept Cisco pluggable SFP transceivers, including Fast Ethernet and ruggedized Gigabit fiber optics for links up to roughly 50 miles (80 km) on the longest-reach modules. Specific transceiver compatibility should be verified against the manufacturer's transceiver compatibility matrix at tmgmatrix.cisco.com. Transceivers are sold separately.

The Cisco IE-1000-4P2S-LM is a lightly managed, web-managed Layer 2 switch. It is configured through a browser-based Cisco Web Device Manager graphical interface with zero-touch Plug and Play discovery, so operational technology staff can set it up without command-line or deep IT networking knowledge. It supports Layer 2 features such as VLANs, STP/RSTP/MSTP, IGMP snooping, port security, SNMP, PoE management, and EtherNet/IP (CIP) awareness. It does not run Cisco IOS or IOS XE and does not perform IP routing.

No. The Cisco IE-1000-4P2S-LM does not support switch stacking. There is no stacking module, stack cable, or stack bandwidth on the IE 1000 Series. Multiple switches are interconnected as independent Layer 2 devices over their Ethernet or fiber uplinks, and network resilience is provided through spanning-tree protocols (STP, RSTP, MSTP) and the switch's redundant voltage feeds rather than through a stack.

The Cisco IE-1000-4P2S-LM operates from -40°C to +70°C in a vented enclosure, -40°C to +60°C in a sealed enclosure, and -34°C to +75°C in a fan- or blower-equipped enclosure and is rated to IP30 for ingress protection. It mounts on a standard 35 mm DIN rail, accepts a 48-54V DC input, and supports redundant voltage feeds and alarm relays. Cisco rates its mean time between failure (MTBF) at 374,052 hours and covers the hardware with a five-year limited warranty. Its extended low-temperature rating suits unconditioned outdoor cabinets in surveillance, transportation, and utility deployments.

Both are PoE, Layer 2, web-managed IE 1000 switches with two Gigabit SFP fiber uplinks and the same 5.6 Gbps switching bandwidth and 2.8 Gbps forwarding bandwidth. The IE-1000-4P2S-LM is a six-port model with four Fast Ethernet PoE/PoE+ downlinks and a 120 W PoE budget. The IE-1000-8P2S-LM is a ten-port model with eight Fast Ethernet PoE/PoE+ downlinks and a larger 180 W PoE budget for higher-density powered deployments.

No. Cisco has not published an End-of-Sale or End-of-Life notice for the Cisco IE-1000-4P2S-LM or the Industrial Ethernet 1000 Series. Cisco maintains dedicated end-of-life notice listings for its other industrial switch families, such as the IE 2000 and IE 3000 Series, but no such hardware notice has been issued for the IE 1000 Series, so the IE-1000-4P2S-LM remains an actively available product.

The Cisco IE-1000-4P2S-LM is sold new and factory-sealed. It is covered by a Network Devices Inc. one-year warranty and a 30-day return policy. The switch hardware also carries Cisco's five-year limited warranty.