You have no items in your shopping cart.
Device type | Switch, 1 G, 50 ports |
Enclosure type | Rack-mountable, 1 RU |
Ports | 48 x 10/100/1000, 2 x Gigabit SFP/RJ-45 |
Power over Ethernet (PoE) | PoE+ (48 ports, 375W) |
Performance | 100-Gbps switching capacity, 74.41-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 48 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45 (PoE+), 2 x Gigabit SFP/RJ-45 |
Power device | Power supply, internal |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 17.3 in (440 mm) |
Depth | 13.78 in (350 mm) |
Height | 1.45 in (44 mm) |
Weight | 10.63 lb (4.82 kg) |
Mounting kit | Included |
MTBF | 53,839 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
Cisco SG250-50P-K9 Switch is a next-generation, powerful, and reliable switching solution that comes combined with a set of features required for a solid business network.
Cisco SG250-50P-K9 Switch is designed for Smart Network Application, FindIT Network Manager, and Network Plug and Play (PnP) support. Users can deploy and configure a complete business network in minutes.
Device type | Switch, 1 G, 48 ports |
Enclosure type | Rack-mountable, 1 RU |
Ports | 48 x 10/100/1000, 2 x 10 GE copper, 2 x 10 GE SFP+ |
Performance | 176-Gbps switching capacity, 130.94-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON,HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 48 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45, 2 x 10GBASE-T, 2 x SFP+ |
Power device | Power supply, internal |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 17.3 in (440 mm) |
Depth | 10.12 in (257 mm) |
Height | 1.45 in (44 mm) |
Weight | 6.61 lb (3 kg) |
Mounting kit | Included |
MTBF | 68,585 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
Next-generation 250 Series Smart Switches combine powerful performance and reliability with a suite of features that you need for a solid business network. With Smart Network Application, FindIT Network Manager, and Network Plug and Play (PnP) support, you can deploy and configure a complete business network in minutes.
The Cisco 250 series switches combine powerful network performance and reliability with a complete suite of the network features you need for a solid business network. These powerful Fast Ethernet or Gigabit Ethernet switches provide multiple management options, sophisticated security capabilities, fine-tuned Quality-of-Service (QoS) and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches.
Device type | Switch, 1 G, 8 ports |
Enclosure type | Compact, 1 unit |
Ports | 8 x 10/100/1000 |
Power over Ethernet (PoE) | PoE+ (8 ports, 45W) |
Performance | 16-Gbps switching capacity, 11.9-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 8 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45 (PoE+) |
Power device | Power supply, external |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 6.3 in (160 mm) |
Depth | 5.04 in (128 mm) |
Height | 1.18 in (30 mm) |
Weight | 1.23 lb (0.56 kg) |
Mounting kit | Included |
MTBF | 506,682 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
For businesses requiring high performance, advanced security, and rich manageability from the network, fully managed switches are an excellent choice. However, they also typically come with high price tags. Smart switches provide the right level of network features and capabilities for growing businesses at a lower price, so you'll have more dollars to put toward other areas of your business.
With Cisco 250 Series Smart Switches, you can achieve business-class network performance and security without paying for advanced network features that you will not use. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, but low cost is a top priority, Cisco 250 Series Smart Switches provide the ideal solution.
Device type | Switch, 1 G, 26 ports |
Enclosure type | Rack-mountable, 1 RU |
Ports | 24 x 10/100/1000, 2 x Gigabit SFP/RJ-45 |
Power over Ethernet (PoE) | PoE+ (24 ports, 100W) |
Performance | 52-Gbps switching capacity, 38.69-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 24 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45 (PoE+), 2 x Gigabit SFP/RJ-45 |
Power device | Power supply, internal |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 17.3 in (440 mm) |
Depth | 10.12 in (257 mm) |
Height | 1.45 in (44 mm) |
Weight | 7.43 lb (3.37 kg) |
Mounting kit | Included |
MTBF | 333,792 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
The Cisco 250 series is the next generation of affordable smart switches that combine powerful network performance and reliability with the essential network management features you need for a solid business network. These expandable Fast Ethernet or Gigabit Ethernet switches provide basic management, security, and quality-of-service (QoS) features beyond those of an unManaged or consumer-grade switch, at a lower cost than Managed switches. And with an easy-to-use web user interface, Auto Smartports, and flexible Power over Ethernet (PoE) Plus capability, you can deploy and configure a complete business network in minutes.
Device type | Switch, 1 G, 26 ports |
Enclosure type | Rack-mountable, 1 RU |
Ports | 24 x 10/100/1000, 2 x Gigabit SFP/RJ-45 |
Power over Ethernet (PoE) | PoE+ (24 ports, 195W) |
Performance | 52-Gbps switching capacity, 38.69-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, I EEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 24 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45 (PoE+), 2 x Gigabit SFP/RJ-45 |
Power device | Power supply, internal |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 17.3 in (440 mm) |
Depth | 10.12 in (257 mm) |
Height | 1.45 in (44 mm) |
Weight | 8.40 lb (3.81 kg) |
Mounting kit | Included |
MTBF | 430,341 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
Cisco SG250-26P-K9 Switch is smart and affordable. It comes in a combination of powerful network performance and reliability with the essential network management features that are necessary for a solid business network.
Cisco SG250-26P-K9 Switch is an expandable fast Ethernet or Gigabit Ethernet switch. It guarantees to provide basic management, security, and quality-of-service (QoS) features in addition to those of an unmanaged or consumer-grade switch. Get this switching solution at a lower cost than managed switches. Also, get an easy to use web user interface, Auto Smartports, and flexible Power over Ethernet (PoE) Plus capability. By using this switching solution, users can deploy and configure a complete business network in minutes.
Device type | Switch, 1 G, 24 ports |
Enclosure type | Rack-mountable, 1 RU |
Ports | 24 x 10/100/1000, 2 x 10 GE copper, 2 x 10 GE SFP+ |
Power over Ethernet (PoE) | PoE+ (24 ports, 195W) |
Performance | 128-Gbps switching capacity, 95.23-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 24 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45, PoE, 2 x 10GBASE-T, 2 x SFP+ |
Power device | Power supply, internal |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 17.3 in (440 mm) |
Depth | 10.12 in (257 mm) |
Height | 1.45 in (44 mm) |
Weight | 8.51 lb (3.86 kg) |
Mounting kit | Included |
MTBF | 62,949 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
Cisco SG250X-24P-K9 Switch helps build a reliable, easy-to-use business network at affordable cost. Get high-speed desktop connectivity, flexible wireless connectivity, and solutions for unified communications, such as IP telephony and video surveillance onto a single Ethernet network.
Cisco SG250X-24P-K9 Switch is designed to be easy to deploy and use by small businesses or the partners. It comes with a high-performance capability to segment business networks into separate workgroups and communicate across VLANs. Cisco SG250X-24P-K9 Switch also supports 10 Gigabit Ethernet uplinks on select models, which help build a high-performance and future-ready network to support a growing business.
Cisco SG250-50-K9 Switch is powered with efficient networking solutions to deliver high performance and reliability with a complete set of the network features for a solid business network.
Cisco SG250-50-K9 Switch is a powerful fast Ethernet or Gigabit Ethernet switch offering multiple management options with sophisticated security capabilities, fine-tuned Quality-of-Service (QoS) and Layer 3 static routing solutions. It is ideal switch for those who look for one featuring far beyond those of an unmanaged or consumer-grade switch at a lower cost than for fully managed switches.
Device type | Switch, 1 G, 10 ports |
Enclosure type | Compact, 1 unit |
Ports | 8 x 10/100/1000, 2 x Gigabit SFP/RJ-45 |
Power over Ethernet (PoE) | PoE+ (8 ports, 62W) |
Performance | 20-Gbps switching capacity, 14.88-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 8 x 10BASE-T/100BASE-TX/1000BASE-T, RJ-45 (PoE+), 2 x Gigabit SFP/RJ-45 (60W PoE PD) |
Power device | Power supply, external |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 11.0 in (280 mm) |
Depth | 6.69 in (170 mm) |
Height | 1.45 in (44 mm) |
Weight | 2.65 lb (1.2 kg) |
Mounting kit | Included |
MTBF | 205,647 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
Attain business-class networking performance and reliability with the Cisco Small Business SG250-10P Switch. With features like Multiple Spanning Tree (MSTP), Power over Ethernet Plus (PoE+) and PoE pass-through, this Gigabit switch offers enhanced capabilities for efficient network management. It sports eight 10/100/1000 PoE+ ports and two Combo Gigabit RJ-45/SFP ports for speedy file transfer and seamless connectivity. Through energy detect, Energy Efficient Ethernet, cable length detection and other energy-saving features, this Cisco smart switch enables eco-friendly operation. Smart PoE switch for easy deployment across classrooms, meeting rooms, hotel rooms and more. Browser-based user interface for easy setup and management. USB port for simplified file management. DoS attack prevention and other features for enhanced security and protection of business data
Device type | Switch, 100 M, 24 ports |
Enclosure type | Rack-mountable, 1 RU |
Ports | 24 x 10/100, 2 x Gigabit SFP/RJ-45, 2 x Gigabit SFP |
Power over Ethernet (PoE) | PoE+ (24 ports, 185W) |
Performance | 12.8-Gbps switching capacity, 9.52-Mpps forwarding performance (64-byte packet size) |
MAC address table size | 8k entries |
Capacity | 256 active VLANs |
Jumbo frame | Yes |
Remote management protocol | SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH |
Features | Layer 2 switching, Layer 3 switching, DHCP support, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree (MSTP), Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts |
Compliant standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3af PoE, IEEE 802.3at PoE, IEEE 802.3az |
RAM | 512 MB |
Flash memory | 256 MB flash |
Status indicators | System, link/speed per port |
Interfaces | 24 x 10BASE-T/100BASE-TX, RJ-45, 2 x Gigabit SFP/RJ-45, 2 x Gigabit SFP |
Power device | Power supply, internal |
Voltage required | AC 120/230V (50/60 Hz) |
Width | 17.3 in (440 mm) |
Depth | 10.12 in (257 mm) |
Height | 1.45 in (44 mm) |
Weight | 9.04 lb (4.1 kg) |
Mounting kit | Included |
MTBF | 314,040 hours |
Compliant standards | UL 60950, FCC Part 15 A, CSA 22.2 |
Service and support | Limited lifetime warranty |
Service and support details | Limited warranty: lifetime; technical support (Web): 1 year; technical support (phone consulting): 1 year |
Minimum operating temperature | 32F (0C) |
Maximum operating temperature | 122F (50C) |
Humidity range operating | 10-90% (noncondensing) |
Minimum storage temperature | -4F (-20C) |
Maximum storage temperature | 158F (70C) |
Humidity range storage | 10-90% (noncondensing) |
The Cisco 250 series switches combine powerful network performance and reliability with a complete suite of the network features you need for a solid business network. These powerful Fast Ethernet or Gigabit Ethernet switches provide multiple management options, sophisticated security capabilities, fine-tuned Quality-of-Service (QoS) and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches.