SAVE BIG! UP TO 70% OFF on ROUTERS.

Aggregate Throughput	50 Mbps to 100 Mbps
Total onboard WAN or LAN 10/100/1000 ports	2
RJ-45-based ports	2
SFP-based ports	1
Enhanced service-module slots	0
Doublewide service-module slots	0
NIM slots	2
OIR (all I/O modules)	Yes
Onboard ISC slot	1
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes)	4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)	8 GB
Default memory DDR3 ECC DRAM (data plane)	NA
Maximum memory DDR3 ECC DRAM (data plane)	NA
Default memory DDR3 ECC DRAM (control/services plane)	NA
Maximum memory DDR3 ECC DRAM (control/services plane)	NA
Default flash memory	4 GB
Maximum flash memory	8 GB
External USB 2.0 slots (type A)	1
USB console port -type B mini (up to 115.2 kbps)	1
USB console port -type B mini (up to 115.2 kbps)	1
Serial console port - RJ45 (up to 115.2 kbps)	1
Serial auxiliary port - RJ45 (up to 115.2 kbps)	1
Power-supply options	External: AC and PoE
Redundant power supply	N/A
AC input voltage	100 to 240 VAC auto ranging
AC input frequency	47 to 63 Hz
AC input current range, AC power supply (maximum)	1.5 to 0.6A
AC input surge current	90 A peak and less than 3 Arms per half cycle
Typical power (no modules) (watts)	36
Maximum power with AC power supply (watts)	125
Maximum power with PoE power supply (platform only) (watts)	260
Maximum endpoint PoE power available from PoE power supply (watts)	120

 

 

 

 

Cisco ISR4321-SEC/K9 Router Overview

 

The Cisco 4000 Family Integrated Services Router (ISR) revolutionizes WAN communications in the enterprise branch. With new levels of built-in intelligent network capabilities and convergence, it specifically addresses the growing need for application-aware networking in distributed enterprise sites. These locations tend to have lean IT resources. But they often also have a growing need for direct communication with both private data centers and public clouds across diverse links, including Multiprotocol Label Switching (MPLS) VPNs and the Internet.

 

Bundle	Security Bundle
Aggregate Throughput	50 Mbps to 100 Mbps
Total onboard WAN or LAN 10/100/1000 ports	2
RJ-45-based ports	2
SFP-based ports	1
NIM (Network Interface Modules) slots	2
Onboard ISC slot	1
Memory	4 GB (default) / 8 GB (maximum)
Flash Memory	4 GB (default) / 8 GB (maximum)
Power-supply options	External: AC and PoE
Rack height	1 RU
Dimensions (H x W x D)	44.55 mm x 369.57 mm x 294.64 mm
Package Weight	9.19 Kg

Enhanced service-module slots	0
Doublewide service-module slots	0
NIM slots	2
OIR (all I/O modules)	Yes
Onboard ISC slot	1
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes)	4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)	8 GB
Default memory DDR3 ECC DRAM (data plane)	NA
Maximum memory DDR3 ECC DRAM (data plane)	NA
Default memory DDR3 ECC DRAM (control/services plane)	NA
Maximum memory DDR3 ECC DRAM (control/services plane)	NA
Default flash memory	4 GB
Maximum flash memory	8 GB
External USB 2.0 slots (type A)	1
USB console port -type B mini (up to 115.2 kbps)	1
Serial console port - RJ45 (up to 115.2 kbps)	1
Serial auxiliary port - RJ45 (up to 115.2 kbps)	1
Power-supply options	External: AC and PoE
Redundant power supply	N/A
AC input voltage	100 to 240 VAC autoranging
AC input frequency	47 to 63 Hz
AC input current range, AC power supply (maximum)	1.5 to 0.6A
AC input surge current	90 A peak and less than 3 Arms per half cycle
Typical power (no modules) (watts)	36
Maximum power with AC power supply (watts)	125
Maximum power with PoE power supply (platform only) (watts)	260
Maximum endpoint PoE power available from PoE power supply (watts)	120

 

 

 

HIGH-PERFORMANCE CISCO ISR4321/K9 ROUTER

CISCO ISR4321/K9 ROUTER is designed to deliver advanced routing services to small enterprise branch environments. 

Key Benefits of CISCO ISR4321/K9 ROUTER

CISCO ISR4321/K9 ROUTER offers pay-as-you-grow performance and has 50Mbps throughput by default. It also offers increased forwarding capacity to 100Mbps through the use of FL-4320-PERF-K9 licenses. 

 

Aggregate Throughput	50 Mbps to 100 Mbps
Total onboard WAN or LAN 10/100/1000 ports	2
RJ-45-based ports	2
SFP-based ports	1
NIM (Network Interface Modules) slots	2
Onboard ISC slot	1
Memory	4 GB (default) / 8 GB (maximum)
Flash Memory	4 GB (default) / 8 GB (maximum)
Power-supply options	External: AC and PoE
Rack height	1 RU
Dimensions (H x W x D)	44.55 x 369.57 x 294.64 mm
Package Weight	9.19 Kg

Type	Cisco ISR4331/K9 with Security Bundle
Aggregate Throughput	100 Mbps to 300 Mbps
Total onboard WAN or LAN 10/100/1000 ports	3
RJ-45-based ports	2
SFP-based ports	2
Enhanced service-module slots	1
Doublewide service-module slots	0
NIM slots	2
OIR (all I/O modules)	Yes
Onboard ISC slot	1
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes)	4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)	16 GB
Default memory DDR3 ECC DRAM (data plane)	NA
Maximum memory DDR3 ECC DRAM (data plane)	NA
Default memory DDR3 ECC DRAM (control/services plane)	NA
Maximum memory DDR3 ECC DRAM (control/services plane)	NA
Default flash memory	4 GB
Maximum flash memory	16 GB
External USB 2.0 slots (type A)	1
USB console port -type B mini (up to 115.2 kbps)	1
Serial console port - RJ45 (up to 115.2 kbps)	1
Serial auxiliary port - RJ45 (up to 115.2 kbps)	1
Power-supply options	Internal: AC and PoE
Redundant power supply	N/A
AC input voltage	100 to 240 VAC autoranging
AC input frequency	47 to 63 Hz
AC input current range, AC power supply (maximum)	3 to 1.3A
AC input surge current	60 A peak and less than 5 Arms per half cycle
Typical power (no modules) (watts)	42
Maximum power with AC power supply (watts)	250
Maximum power with PoE power supply (platform only) (watts)	530
Maximum endpoint PoE power available from PoE power supply (watts)	250

 

Use Cisco ISR4331-SEC/K9 Router for Application-aware Networking Solutions

Cisco ISR4331-SEC/K9 Router is WAN communication featured Cisco ISR4331/K9 router with Security Bundle. Ideal for distributed enterprise branch environment, this router has built-in intelligent network capabilities and convergence.  

Key Benefits of Cisco ISR4331-SEC/K9 Router

Cisco ISR4331-SEC/K9 Router is built to address the growing need for application-aware networking in distributed enterprise environment, which tends to have lean IT resources. At the same time, those have an increasing need for direct communication with both private data centers and public clouds across diverse links, including Multiprotocol Label Switching (MPLS) VPNs and the Internet.

 

Bundle	Security Bundle
Aggregate Throughput	100 Mbps to 300 Mbps
Total onboard WAN or LAN 10/100/1000 ports	3
RJ-45-based ports	2
SFP-based ports	2
Enhanced service-module (SM-X) slot	1
NIM (Network Interface Modules) slots	2
Onboard ISC slot	1
Memory	4 GB (default) / 16 GB (maximum)
Flash Memory	4 GB (default) / 16 GB (maximum)
Power-supply options	Internal: AC and PoE
Rack height	1 RU
Dimensions (H x W x D)	44.45 x 438.15 x 438.15 mm
Package Weight	12.96 Kg

 

Description	ISR 1100 8 Ports Dual GE WAN Ethernet Router
Dimensions (H x W x D)	Non-LTE models: H x W X D = 1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet)
Weight with AC PS (w/o modules)	5.5 Lbs. (2.5 kg) maximum
Input voltage	Universal 100 to 240 VAC
Frequency	50-60 Hz
Input current	PoE not enabled: 0.82A maximum PoE enabled: 1.55A Maximum
Surge current	90 A peak and less than 8 Arms per half cycle
Micro USB Port	One RJ-45: Separate console port
USB port	USB 3.0 Type A host port USB devices supported: USB flash memory
Console port	One USB 5-pin micro Type B: Console management connectivity
10/100/1000 Gigabit Ethernet	Two GE ports allocated among RJ45 and SFP as: One combo port with 10/100/1000RJ-45 Ethernet port or SFP Ethernet port (labeled GE0/0/0) One dedicated 10/100/1000RJ-45 Ethernet port (labeled GE0/0/1)
Wireless VLANs	32 (encrypted and non-encrypted VLANs)
Wireless specifications	2x2 .11ac Wave 2
Default and maximum DRAM	4GB
Default and maximum flash	4GB
Inline PoE	4 ports for -8P PIDs, 2 ports for -4P PIDs 802.3af-compliant PoE or 802.3at-compliant PoE+
Acoustic for Cisco 1100 Series ISRs	Emission 47 CFR Part 15 CISPR 32 Edition 2 EN 300 386 V1.6.1 EN 55032:2012/ AC:2013 EN 55032:2015 EN61000-3-2 2014 EN61000-3-3: 2013 ICES-003 ISSUE 6:2016 KN 32: 2015 V-2/2015.04 V-3/2015.04 TCVN 7189: 2009 CNS13438: 2006 IEC 60950-1 EN 60950-1 UL 60950-1 CSA C22.2 No. 60950-1 Immunity CISPR24: 2010 + A1: 2015 EN 300 386 V1.6.1 EN55024: 2010 + A1: 2015 KN35: 2015 TCVN 7317: 2003
Operating humidity	5 to 85% relative humidity
Operating temperature	32 to 104 F (0 to 40 C) Sea Level; 32 to 77 F (0 C to 25 C) at 10,000 ft 1.5 C derating per 1000 ft
Altitude	0-10,000 ft (0-3050 m)
Nonoperating temperature	-40 to 158 F (-40 to 70 C)
Nonoperating humidity	5 to 95% relative humidity (noncondensing)
Nonoperating altitude	0 to 15,000 ft (0 to 4570m)

 

 

 

Cisco C1111-8P Router

Cisco C1111-8P Router is easy to deploy and easy to manage, with cutting-edge, scalable, multi-core separate data and control panel capabilities.

Key Benefits of Cisco C1111-8P Router

Cisco C1111-8P Router is best-suited for deployment as Customer Premises Equipment (CPE) in enterprise branch offices. This CPE is also deployable in service provider managed environments as well as smaller form factor and M2M use cases.

 

GE	1
GE/SFP combo	1
ADSL2/VDSL2+	N/A
LTE Advanced (CAT6)	N/A
802.11ac	N/A
GE	8
PoE	4
PoE+	2
Integrated USB 3.0 AUX/console	Yes
Dimensions (H x W x D)	1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet)
Weight with AC PS (w/o modules)	5.5 Lbs. (2.5 kg) maximum

 

Cisco ISR4331/K9 Router Specifications 

 

Aggregate Throughput	100 Mbps to 300 Mbps
Total onboard WAN or LAN 10/100/1000 ports	3
RJ-45-based ports	2
SFP-based ports	2
Enhanced service-module slots	1
Doublewide service-module slots	0
NIM slots	2
OIR (all I/O modules)	Yes
Onboard ISC slot	1
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes)	4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)	16 GB
Default memory DDR3 ECC DRAM (data plane)	NA
Maximum memory DDR3 ECC DRAM (data plane)	NA
Default memory DDR3 ECC DRAM (control/services plane)	NA
Maximum memory DDR3 ECC DRAM (control/services plane)	NA
Default flash memory	4 GB
Maximum flash memory	16 GB
External USB 2.0 slots (type A)	1
USB console port -type B mini (up to 115.2 kbps)	1
Serial console port - RJ45 (up to 115.2 kbps)	1
Serial auxiliary port - RJ45 (up to 115.2 kbps)	1
Power-supply options	Internal: AC and PoE
Redundant power supply	N/A
AC input voltage	100 to 240 VAC autoranging
AC input frequency	47 to 63 Hz
AC input current range, AC power supply (maximum)	3 to 1.3A
AC input surge current	60 A peak and less than 5 Arms per half cycle
Typical power (no modules) (watts)	42
Maximum power with AC power supply (watts)	250
Maximum power with PoE power supply (platform only) (watts)	530
Maximum endpoint PoE power available from PoE power supply (watts)	250

 

Use Cisco ISR4331/K9 Router for Application-aware Networking

Cisco ISR4331/K9 Router is one of the best-in-class WAN communication routers for the enterprise settings. It comes with new levels of built-in intelligent network capabilities and convergence and is built to address growing need for application-aware networking in distributed enterprise sites.

Key Benefits of Cisco ISR4331/K9 Router

Cisco ISR4331/K9 Router offers solutions for growing need for direct communication with both private data centers and public clouds across diverse links, including Multi-Protocol Label Switching (MPLS) VPSs and the Internet.

 

Product Code	Cisco ISR4331/K9
Aggregate Throughput	100 Mbps to 300 Mbps
Total onboard WAN or LAN 10/100/1000 ports	3
RJ-45-based ports	2
SFP-based ports	2
Enhanced service-module (SM-X) slot	1
NIM (Network Interface Modules) slots	2
Onboard ISC slot	1
Memory	4 GB (default) / 16 GB (maximum)
Flash Memory	4 GB (default) / 16 GB (maximum)
Power-supply options	Internal: AC and PoE
Rack height	1 RU
Dimensions (H x W x D)	44.45 x 438.15 x 438.15 mm
Package Weight	12.96 Kg

 

Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details.	Height: 1.71 in. (43.43 mm) Width: 17.3 in. (439.42 mm) Depth: 18.17 in. (461.5 mm) Weight: 25 lb (11.35 kg) fully loaded Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated.
Default memory	8-GB DRAM shared across route processor, ESP, and SIP
Number of SIPs or Ethernet line cards supported	Integrated in chassis
Shared port adapters	1 single-height SPA slot
Ethernet port adapters	N/A
Cisco ASR 1000 Series ESP	Integrated in chassis
Route processor	Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad-Core Processor
Redundancy	Software: Yes
Built-in Gigabit Ethernet ports	Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports
Built-in 10 Gigabit Ethernet port	Yes: Two 10 Gigabit Ethernet Small Form-Factor Plus Pluggable (SFP+) ports Note: Built-in 10-GB ports cannot be reduced to 1-GB speed.
Network interface module	Yes
Cisco ASR 1000 Series	Cisco ASR 1001-X
ESP support	Cisco ASR 1000 Series 2.5-Gbps ESP (default) Upgradable through a software-activated feature license to 5, 10, or 20 Gbps
ESP bandwidth	2.5 to 20 Gbps
ESP memory	Share the same control memory on the route processor
SIPs and Ethernet line cards	Integrated in chassis; not upgradable
Embedded hardware-based encryption	Yes: Up to 8-Gbps crypto support throughput
Minimum Cisco IOS XE Software release	Cisco IOS XE Software Release 3.12.0
Rack-mounting	Yes: 19-inch
Wall-mounting	No
External USB flash memory	1-GB USB flash-memory support
Redundant power supply	Yes: Dual power supplies by default; option of either AC or DC power supply Note: A mix of one AC and one DC power supply is not supported.
Power input	Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72V; 48V nominal)
Power consumption	Maximum (DC): 242W    Maximum (AC): 250W    Maximum (out): 250W
Airflow	Front-to-back
Operating temperature (nominal)	32 to 104 F (0 to 40 C)
Operating temperature (short-term)	32 to 122 F (0 to 50 C)
Operating humidity (nominal) (relative humidity)	10 to 85%
Operating humidity (short-term)	5 to 90%
Storage temperature	-40 to 150 F (-40 to 70 C)
Operating altitude	-500 to 10,000 feet (152 to 3048 meters)
EMC standards	FCC 47 CFR Part 15 Class A    VCCI Class A    AS/NSZ Class A    ICES-003 Class A    EN55022/CISPR 22 Information Technology Equipment (Emissions)    EN55024/CISPR 24 Information Technology Equipment (Immunity)    EN300 386 Telecommunications Network Equipment    (EMC)    EN50082-1/EN61000-6-1 Generic Immunity Standard
Safety Standard	UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1

 

 

The Cisco ASR 1000 series delivers multiple services embedded in the Cisco QuantumFlow Processor (QFP) at wire speeds from 2.5 to 200 Gbps. The services supported on the Cisco QFP include security services (for example, up to 78G encryption throughput and up to 6M firewall sessions), quality of service (QoS), Application Visibility and Control, Performance Routing, broadband aggregation, Cisco Unified Border Element (SP Edition), and Cisco Unified Border Element (Enterprise Edition). Additionally, Cisco ASR 1000 offers feature-rich scalable Data Center Interconnect (DCI) solutions that include Overlay Transport Virtualization (OTV) and Virtual Private Label Switching (VPL) to connect geographically dispersed data centers. Advanced routing techniques like Locator Identity Separation Protocol (LISP) allow host mobility within and across subnets.

 

IP and IP services	Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)   Generic Routing Encapsulation (GRE) and Multipoint GRE (MGRE)   Cisco Express Forwarding   Standard 802.1d Spanning Tree Protocol   Layer 2 Tunneling Protocol (L2TP)   L2TP Version 3 (L2TPv3)   Network Address Translation (NAT)   Dynamic Host Configuration Protocol (DHCP) server, relay, and client   Dynamic DNS   DNS Proxy   DNS Spoofing   Access Control Lists (ACLs)   IPv4 and IPv6 multicast   Open Shortest Path First (OSPF)   Border Gateway Protocol (BGP)   Performance Routing (PfR)   Enhanced Interior Gateway Routing Protocol (EIGRP)   Virtual Route Forwarding (VRF) Lite   Next Hop Resolution Protocol (NHRP)   Bidirectional Forwarding Detection (BFD)   Web Cache Communication Protocol (WCCP)
xDSL	True Multimode VDSL2 and ADSL2+ over Annex A, B, J, and M, including traditional G.DMT and T1.413   World-class interoperability with industry-standard DSL Access Multiplexer (DSLAM) chipsets   Highest field reliability with Impulse Noise Protection (INP) over Repetitive Electrical Impulse Noise (REIN) and single isolated impulse noise (SHINE), extended INP delay, G.INP, physical layer retransmission, Seamless Rate Adaptation (SRA), and Bitswap   VDSL2 Persistent Storage Device (PSD) profiles up to 17a/b with support for spectral shaping   VDSL2 vectoring to offer blazing fiber speeds over copper   Remote management with TR069 and CWMP   Investment protection with Gigabit Ethernet
Switch features	Auto Media Device In/Media Device Cross Over (MDI-MDX)   25 802.1Q VLANs   MAC filtering   Switched Port Analyzer (SPAN)   Storm control   Smart ports   Secure MAC address   Internet Group Management Protocol Version 3 (IGMPv3) snooping   802.1X
Security features	Secure connectivity:   Secure Sockets Layer (SSL) VPN for secure remote access   Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256   Public-Key-Infrastructure (PKI) support   50 IPsec tunnels   Cisco Easy VPN client and server   NAT transparency   Dynamic Multipoint VPN (DMVPN)   Tunnel-less Group Encrypted Transport VPN (GET VPN)   VRF-aware IPsec   IPsec over IPv6   Adaptive control technology   Session Initiation Protocol (SIP) application-layer gateway   Cisco IOS Firewall:    Zone-based policy firewall    VRF-aware stateful inspection routing firewall    Stateful inspection transparent firewall   Advanced application inspection and control   HTTPS, FTP, and Telnet Authentication Proxy   Dynamic and static port security   Firewall stateful failover   VRF-aware firewall   Cisco IOS Software black and white lists   Integrated threat control:    Intrusion Prevention System (IPS)   Control plane policing   Flexible packet matching   Network foundation protection
Quality of Service (QoS)	Low-Latency Queuing (LLQ)   Weighted Fair Queuing (WFQ)   Class-Based WFQ (CBWFQ)   Class-Based Traffic Shaping (CBTS)   Class-Based Traffic Policing (CBTP)   Policy-Based Routing (PBR)   Class-Based QoS MIB   Class of Service (CoS)-to-Differentiated Services Code Point (DSCP) mapping   Class-Based Weighted Random Early Detection (CBWRED)   Network-Based Application Recognition (NBAR)   Link Fragmentation and Interleaving (LFI)   Resource Reservation Protocol (RSVP)   Real-Time Transport Protocol (RTP) header compression (cRTP)   Differentiated Services (DiffServ)   QoS preclassify and prefragmentation   Hierarchical QoS (HQoS)
Management	Cisco Configuration Professional   Cisco Configuration Express   Cisco Configuration Engine support   Cisco AutoInstall   Cisco IP Service-Level Agreement (IP SLA)   Cisco IOS Embedded Event Manager (EEM)   CiscoWorks   Cisco Security Manager   Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, Command-Line Interface (CLI), and HTTP management   RADIUS and TACACS+   Cisco Next-Generation Plug-and-Play (NG PnP) Protocol
High availability	Virtual Router Redundancy Protocol (VRRP) (RFC 2338)   HSRP   MHSRP
Metro Ethernet	Ethernet OA&M   Ethernet Local Management Interface (E-LMI)   IP SLA for Ethernet
IPv6	IPv6 addressing architecture   IPv6 name resolution   IPv6 statistics   IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation)   Internet Control Message Protocol Version 6 (ICMPv6)   IPv6 DHCP   OSPFv3   BGP4+   IPv6 Path Maximum Transmission Unit (PMTU)   IPv6 neighbor discovery   IPv6 stateless address autoconfiguration (SLAAC)   IPv6 multicast routing
Application visibility and control	NBAR2   Flexible NetFlow (FNF)   Performance Agent
Number of recommended users	50
Default and maximum DRAM	Default 1 GB
Default and maximum flash memory	2 GB on all Cisco 900 Series ISR models; not upgradable
WAN	Refer to Table 2 for details
LAN switch	Refer to Table 2 for details
Separate console ports	RJ-45
USB 2.0	One USB 2.0 Type A port
Physical dimensions	H x W x D = 1.70 x 9.0 x 9.5 in. (4.32 x 22.86 x 24.13 cm) (includes rubber feet)
Power supply	Power specifications:   AC input voltage: Universal 100 to 240 VAC   Frequency: 50 to 60 Hz   Internal power supply (C921-4P and C931-4P only)
Approvals and compliance	Safety:   IEC 60950-1   UL 60950-1   CAN/CSA C22.2 No. 60950-1   EN 60950-1   AS/NZS 60950.1   Class I Equipment (C921-4P and C931-4P only)   Class III Equipment (C927-4P, C927-4PM, and C926-4P only) Emissions:   47 CFR Part 15: 2006    CISPR22: Edition 6.0: 2008    CNS13438: 2006    EN 300 386 V1.6.1    EN 55032    EN61000-3-2: 2006 [+ amd 1 & 2]    EN61000-3-3: 2008    ICES-003 Issue 5: 2012    KN 22: 2009   TCVN 7189: 2009   VCCI: V-3/2012.04 Immunity:   CISPR24: 2010 [+ amd 1 & 2]    EN300386: V1.6.1    EN55024: 2010    EN61000-6-1: 2007    KN24: 2011    TCVN 7317:2003
Environmental operating range	Nonoperating temperature: -40 to 158F (-40 to 70C)   Nonoperating humidity: 5% to 95% relative humidity (noncondensing)   Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m)   Operating temperature: 0 to 50C (de-rate 1C per 1000-ft increase in altitude)   Operating humidity: 5% to 95% relative humidity (noncondensing)   Operating altitude: 0 to 10,000 ft (0 to 3000 m)

 

 

 

 

Cisco C931-4P Router Overview

 

The Cisco 900 Series Integrated Services Routers (ISR 900) combines WAN, comprehensive security, and advanced connectivity in a compact, fanless platform. The routers are designed to provide enterprise-class security and connectivity for small to medium businesses. The ISR 931 model comes with a 4-port managed switch, providing LAN ports to connect multiple devices and up to 250 Mbps of VPN throughput for high performance. These small, yet powerful, fixed-configuration routers provide secure broadband and Metro Ethernet connectivity. The routers deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks.

 

WAN interfaces	2 ports Gigabit Ethernet (GE)
LAN interfaces	4-port GE managed switch
Maximum crypto throughput (bit-rate policed)	250 Mbps
Integrated USB 2.0	Yes
Default and maximum DRAM	Default 1 GB
Default and maximum flash memory	2 GB; not upgradable
Dimensions (H x W x D)	1.70 x 9.0 x 9.5 in. (4.32 x 22.86 x 24.13 cm) (includes rubber feet)

The Cisco 4451-X Integrated Services Router revolutionizes the delivery of application aware services in a branch-office environment. This platform extends the Cisco ISR Family by providing Gigabit performance with extensive Layer 7 services hosted internally to the branch office while maximizing operating expenses (OpEx) savings. The Cisco 4451-X offers a multicore CPU architecture running modular Cisco IOS XE software that quickly adapts to the changing needs of your branch-office environment, and enables IT to roll out services at the speed of business. The separation of the control and data planes provides the ability to deliver application-aware network services while maintaining a stable platform and a high level of performance during periods of heavy network load. With the ability to integrate application-aware services and the ability to scale performance without a complete equipment upgrade, the Cisco 4451-X offers exceptional total cost of ownership (TCO) savings and network agility through the intelligent integration of market-leading security, unified communications, and application services. The Cisco 4451-X offers encryption acceleration, voice- and video-capable architecture, application firewall, call processing, and embedded services. In addition, the platform supports a range of wired connectivity options such as T1/E1, T3/E3, and fiber Gigabit Ethernet. This platform offers superior performance and flexibility for network deployments across large and medium-sized enterprise offices.