You have no items in your shopping cart.
Model: | PAN-PA-7080-DC-SYS |
Detail: |
|
Price: | $192,013.20 |
Condition: | Brand New Sealed |
Availability: | SPECIAL ORDER |
Shipping: | FREE SHIPPING for all U.S orders over $100. Please call us at 201-559-1474, fill out the contact form, or chat with a live agent for other shipping methods. |
Tax: | $0.00 Tax Outside NJ and TX |
Quantity: |
The PAN-PA-7080-DC-SYS is equipped with Machine Learning to take the defense against never-before-seen attacks to the next level. This chassis allows you to optimize the following three subsystems for your changing needs: the processing cards (10 slots), the Switch Management Card, and the Dedicated Logging Card.
Specifications | Palo Alto PAN-PA-7080-AC-SYS Firewall |
Performance and Capacities | |
Firewall throughput (HTTP/appmix) (Throughput is measured with App-ID and logging enabled, with 64 KB HTTP/appmix transactions.) | 567/595 Gbps |
Threat Prevention throughput (HTTP/appmix) (Threat Prevention throughput measured with App-ID, IPS, antivirus, antispyware, WildFire, DNS Security, file blocking, and logging enabled, utilizing 64 KB HTTP/appmix transactions) | 292.4/312.8 Gbps |
IPsec VPN throughput ( IPsec VPN throughput is measured with 64 KB HTTP transactions, and logging enabled.) | 312.9 Gbps |
Max concurrent sessions (Max concurrent sessions are measured utilizing HTTP transactions.) | 416M |
New sessions per second (New sessions per second are measured with application override, utilizing 1-byte HTTP transactions.) | 6M |
Virtual systems (base/max) (The base system includes 25 virtual systems at no cost, and up to 200 additional licenses may be purchased. The maximum number of virtual systems supported is 225.) | 25/225 |
PA-7000 Series Networking Features | |
Interface Modes | L2, L3, tap, virtual wire (transparent mode) |
Routing | OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing Policy-based forwarding Point-to-Point Protocol over Ethernet (PPPoE) and DHCP supported for dynamic address assignment Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3 Bidirectional Forwarding Detection (BFD) |
SD-WAN | Path quality measurement (jitter, packet loss, latency) Initial path selection (PBF) Dynamic path change |
IPv6 | L2, L3, tap, virtual wire (transparent mode) Features: App-ID, User-ID, Content-ID, WildFire, and SSL decryption SLAAC |
IPsec and SSL VPN | Key exchange: manual key, IKEv1 and IKEv2 (pre-shared key, certificate-based authentication) Encryption: 3des, AES (128-bit, 192-bit, 256-bit) Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512 GlobalProtect Large Scale VPN for simplified configuration and management (Requires GlobalProtect License.) Secure access over IPsec and SSL VPN tunnels using GlobalProtect Gateway and Portals ((Requires GlobalProtect License.)) |
VLANs | 802.1Q VLAN tags per device/per interface: 4,094/4,094 Aggregate interfaces (802.3ad) intracard and/or intercard, and LACP |
Network Address Translation | NAT modes (IPv4): static IP, Dynamic IP, Dynamic IP and Port (port address translation) NAT64, NPTv6 Additional NAT features: Dynamic IP reservation, tunable Dynamic IP and Port oversubscription |
High Availability | Modes: active/active, active/passive, HA clustering Failure detection: path monitoring, interface monitoring |
Mobile Network Infrastructure | 5G Security GTP Security SCTP Security |
Hardware Specifications (PA-7080 Full System) | |
PA-7000-100G-NPC-A | SFP/SFP+ (80), QSFP+/QSFP28 (40) |
PA-7050-SMC-B PA-7080-SMC-B |
SFP MGT (2), SFP HA1 (2), HSCI HA2/HA3 QSFP+/QSFP28 (2), RJ45 serial console (1), Micro USB serial console (1) |
PA-7000-LFC-A | 480 GB SSD, system drive RAID1 (2 x 240 GB) |
AC input voltage | 100–240 VAC (50–60 Hz) |
Rated input current | 65-27A |
AC power supply output | 2500 W @ 240 VAC 1200 W @ 120 VAC |
DC input voltage | -40 to -60 VDC |
Rated input current | 135A |
DC power output | 2500 watts/power supply |
Max current/power supply | 12 A @ 240 VAC In 75 A @ >40 VDC In |
Power supplies (base/max) | (4/8) |
Max inrush current/power supply | 30Aac / 100Adc peak |
Mean time between failure (MTBF) | Configuration dependent; contact your Palo Alto Networks representative for MTBF details. |
Max BTU/hr | 20,132 |
Rack mountable (dimensions) | 19U, 19” standard rack (32.22”H x 19”W x 24.66”D) |
Weight (stand-alone device/as shipped) | 299.3 lbs. AC / 298.3 lbs. DC |
Safety | cTUVus, cCSAus, CB |
EMI | FCC Class A, CE Class A, VCCI Class A |
Certifications | NEBS Level 3 |
Environment | |
Operating temperature | 32° to 122° F, 0° to 50° C |
Non-operating temperature | -4° to 158° F, -20° to 70° C |
Properties | Palo Alto PAN-PA-7080-DC-SYS Firewall |
Description | PA-7080 Base DC Hardware Bundle. Includes DC Chassis, 4xDC power supplies, 2xFan Trays, Fan Filter, system cards, or optional upgraded system cards |
Product Family | PA-7000 Firewall Series |
Product Type | Firewall |