PALO ALTO PAN-PA-7080-DC-SYS FIREWALL

Model: PAN-PA-7080-DC-SYS
Detail:

  • PA-7080 Base DC Hardware Bundle. Includes DC Chassis, 4xDC power supplies, 2xFan Trays, Fan Filter, system cards, or optional upgraded system cards,
Price:
$192,013.20
Condition: Brand New Sealed
Availability: SPECIAL ORDER
Shipping: FREE SHIPPING for all U.S orders over $100. Please call us at 201-559-1474, fill out the contact form, or chat with a live agent for other shipping methods.
Tax: $0.00 Tax Outside NJ and TX
Quantity:
+
-

Description

Palo Alto PAN-PA-7080-DC-SYS Firewall

The PAN-PA-7080-DC-SYS is equipped with Machine Learning to take the defense against never-before-seen attacks to the next level. This chassis allows you to optimize the following three subsystems for your changing needs: the processing cards (10 slots), the Switch Management Card, and the Dedicated Logging Card.

  • PAN-PA-7080-DC-SYS includes DC Chassis, 4xDC power supplies, 2xFan Trays, Fan Filter, system cards, or optional upgraded system cards

Accessories

Specifications

 
Specifications Palo Alto PAN-PA-7080-AC-SYS Firewall
Performance and Capacities
Firewall throughput (HTTP/appmix) (Throughput is measured with App-ID and logging enabled, with 64 KB HTTP/appmix transactions.) 567/595 Gbps
Threat Prevention throughput (HTTP/appmix) (Threat Prevention throughput measured with App-ID, IPS, antivirus, antispyware, WildFire, DNS Security, file blocking, and logging enabled, utilizing 64 KB HTTP/appmix transactions) 292.4/312.8
Gbps
IPsec VPN throughput ( IPsec VPN throughput is measured with 64 KB HTTP transactions, and logging enabled.) 312.9 Gbps
Max concurrent sessions (Max concurrent sessions are measured utilizing HTTP transactions.) 416M
New sessions per second (New sessions per second are measured with application override, utilizing 1-byte HTTP transactions.) 6M
Virtual systems (base/max) (The base system includes 25 virtual systems at no cost, and up to 200 additional licenses may be purchased. The maximum number of virtual systems supported is 225.) 25/225
PA-7000 Series Networking Features
Interface Modes L2, L3, tap, virtual wire (transparent mode) 
Routing OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing
Policy-based forwarding
Point-to-Point Protocol over Ethernet (PPPoE) and DHCP supported for dynamic address assignment
Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3
Bidirectional Forwarding Detection (BFD)
SD-WAN Path quality measurement (jitter, packet loss, latency)
Initial path selection (PBF)
Dynamic path change
IPv6 L2, L3, tap, virtual wire (transparent mode)
Features: App-ID, User-ID, Content-ID, WildFire, and SSL decryption
SLAAC
IPsec and SSL VPN Key exchange: manual key, IKEv1 and IKEv2 (pre-shared key, certificate-based authentication)
Encryption: 3des, AES (128-bit, 192-bit, 256-bit)
Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512
GlobalProtect Large Scale VPN for simplified configuration and management (Requires GlobalProtect License.)
Secure access over IPsec and SSL VPN tunnels using GlobalProtect Gateway and Portals ((Requires GlobalProtect License.))
VLANs 802.1Q VLAN tags per device/per interface: 4,094/4,094
Aggregate interfaces (802.3ad) intracard and/or intercard, and LACP
Network Address Translation NAT modes (IPv4): static IP, Dynamic IP, Dynamic IP and Port (port address translation)
NAT64, NPTv6
Additional NAT features: Dynamic IP reservation, tunable Dynamic IP and Port oversubscription
High Availability Modes: active/active, active/passive, HA clustering
Failure detection: path monitoring, interface monitoring
Mobile Network Infrastructure 5G Security
GTP Security
SCTP Security
Hardware Specifications (PA-7080 Full System)
PA-7000-100G-NPC-A SFP/SFP+ (80), QSFP+/QSFP28 (40)
PA-7050-SMC-B
PA-7080-SMC-B
SFP MGT (2), SFP HA1 (2), HSCI HA2/HA3 QSFP+/QSFP28 (2), RJ45 serial
console (1), Micro USB serial console (1)
PA-7000-LFC-A 480 GB SSD, system drive RAID1 (2 x 240 GB)
AC input voltage 100–240 VAC (50–60 Hz)
Rated input current 65-27A
AC power supply output 2500 W @ 240 VAC
1200 W @ 120 VAC
DC input voltage -40 to -60 VDC
Rated input current 135A
DC power output 2500 watts/power supply
Max current/power supply 12 A @ 240 VAC In
75 A @ >40 VDC In
Power supplies (base/max) (4/8)
Max inrush current/power supply 30Aac / 100Adc peak
Mean time between failure (MTBF) Configuration dependent; contact your Palo Alto Networks representative for MTBF details.
Max BTU/hr 20,132
Rack mountable (dimensions) 19U, 19” standard rack (32.22”H x 19”W x 24.66”D)
Weight (stand-alone device/as shipped) 299.3 lbs. AC / 298.3 lbs. DC
Safety cTUVus, cCSAus, CB
EMI FCC Class A, CE Class A, VCCI Class A
Certifications NEBS Level 3
Environment
Operating temperature 32° to 122° F, 0° to 50° C
Non-operating temperature -4° to 158° F, -20° to 70° C
 

Properties

Properties Palo Alto PAN-PA-7080-DC-SYS Firewall
Description PA-7080 Base DC Hardware Bundle. Includes DC Chassis, 4xDC power supplies, 2xFan Trays, Fan Filter, system cards, or optional upgraded system cards
Product Family PA-7000 Firewall Series
Product Type Firewall
INTERNATIONAL -

International buyers must acknowledge that all duties and taxes are their sole responsibility and Network Devices Inc is not held responsible for possible additional charges.

DOMESTIC -

Products are shipped Monday through Friday via UPS/FedEx/USPS. The estimated delivery time is 1-6 business days depending on location. If “Free Shipping” is offered, it will be by Ground only and within USA Continental States Only (48 States). There will be a surcharge on shipments to Hawaii, Alaska, Puerto Rico and APO/FPO addresses. After you have made a purchase, the surcharge will be calculated using the parcel’s weight and size. Network Devices Inc ships the product the same day of receiving an order. Otherwise you will a receive notification of delay or cancellation of said order.
 
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Checkout