| Performance |
ARTPEC-8 SoC; deep-learning processing unit (DLPU) for AI analytics; electronic image stabilization (EIS); thermal palettes |
| Video |
H.264 (Baseline/Main/High), H.265 (Main), Motion JPEG; sensor 640×480 scaled up to 800×600 (SVGA); up to 30 fps; Axis Zipstream technology in H.264 and H.265; up to 20 configurable video streams; controllable frame rate and bandwidth; VBR/ABR/MBR; rotation 0°/90°/180°/270° including corridor format; image settings for contrast, brightness, sharpness, exposure zones, compression, mirroring, dynamic text and image overlay, polygon privacy masks |
| Audio |
Two-way audio (half/full duplex); automatic gain control (AGC); 10-band graphic equalizer; input for external unbalanced microphone with optional 5 V mic power; unbalanced line input; audio detection; audio encoding: 24-bit LPCM, AAC-LC 8/16/32/48 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Opus 8/16/48 kHz with configurable bitrate |
| Connectivity |
IPv4, IPv6 USGv6, HTTP, HTTPS, HTTP/2, TLS, FTP, SFTP, CIFS/SMB, SMTP, SNMP v1/v2c/v3 (MIB-II), RTSP, RTP, SRTP/RTSPS, RTCP, TCP, UDP, DHCPv4/v6, DNS/DNSv6, DDNS, IGMP v1/v2/v3, NTP, PTP, NTS, SSH, LLDP, CDP, MQTT v3.1.1, mDNS (Bonjour), UPnP, QoS Layer 3 DiffServ, secure syslog (RFC 3164/5424 over UDP/TCP/TLS), ICMPv4/ICMPv6, link-local address (ZeroConf) |
| Power Supply |
PoE IEEE 802.3af/at Type 1 Class 3 (typical 5.0 W, max 12.95 W); 12–28 V DC (typical 4.8 W, max 12.95 W) |
| Security Features |
Axis Edge Vault cybersecurity platform; TPM 2.0 (CC EAL4+, FIPS 140-2 Level 2); secure element (CC EAL 6+); Axis Cryptographic Module (FIPS 140-2 Level 1); secure boot; signed firmware; signed video; encrypted filesystem (AES-XTS-Plain64 256-bit); AES-XTS-Plain64 256-bit SD-card encryption; Axis device ID; secure keystore; system-on-chip security (TEE); brute force delay protection; password protection; IEEE 802.1X; IEEE 802.1AE (MACsec PSK/EAP-TLS); IEEE 802.1AR; HTTPS/HSTS; TLS v1.2/v1.3; Network Time Security (NTS); host-based firewall |
| Environmental / Ruggedness |
IP66/IP67; IK10; NEMA 250 Type 4X; NEMA TS 2 (2.2.7–2.2.9); IEC 60068-2-1/2/6/14/27/78; ISO 21207 Method B; MIL-STD-810H (selected methods, including 501.7, 502.7, 505.7, 506.6, 507.6, 509.7, 510.7, 514.8, 516.8, 521.4); operating temperature -40 °C to 60 °C; up to 74 °C maximum according to NEMA TS 2; humidity 10–100% RH (condensing) |
| Mounting Options |
Supports wall, pole, corner, and conduit installation via compatible Axis mounts |
| Sensors |
Gyroscopic sensors enabling electronic image stabilization; shock detection for event triggering |
| Events |
Audio: audio detection, audio clip playing, audio clip currently playing; device status: above/below/within operating temperature, IP address removed, new IP address, network lost, system ready, ring power overcurrent protection, live stream active, shock detected; digital audio input status; edge storage: recording ongoing, storage disruption, storage health issues detected; I/O: digital input, manual trigger, virtual input; MQTT: stateless; scheduled and recurring: schedule; video: average bitrate degradation, tampering |
| Analytics |
AXIS Video Motion Detection, AXIS Motion Guard, AXIS Fence Guard, AXIS Loitering Guard, audio detection, active tampering alarm; supports AXIS Perimeter Defender and third-party analytics via AXIS Camera Application Platform (ACAP) |
| Approvals |
Product markings: CSA, UL/cUL, CE, KC; supply chain: TAA compliant; EMC: CISPR 35, CISPR 32 Class A, EN 55035, EN 55032 Class A, EN 50121-4, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, ICES(A)/NMB(A), VCCI Class A, KS C 9835, KS C 9832 Class A, FCC Part 15 Subpart B Class A, IEC 62236-4; Safety: CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 62368-1, IS 13252; Environment: IEC 60068-2-1/2/6/14/27/78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, ISO 21207 Method B, MIL-STD-810H (selected methods), NEMA 250 Type 4X, NEMA TS 2; Network: NIST SP500-267; Cybersecurity: ETSI EN 303 645, BSI IT Security Label, FIPS-140 related modules |
