Cisco IE 2000 IE-2000-16TC-G-L 16-Port Data Industrial Ethernet DIN-Rail Switch with 2x 1G Combo, LAN Lite

Brand:
Cisco
Part Number:
IE-2000-16TC-G-L
  • Switch
  • Managed
  • 16 x 10/100 + 2 x combo GE (SFP/RJ-45) + 2 x FE SFP
  • DIN Rail Mountable
$3,223.37 $1,615.00 Instant Savings $1,608.37

Net 30 or as low as $—/month Apply Now

Quote

Overview

The Cisco Industrial Ethernet 2000 Series is a range of compact, ruggedized DIN-rail access switches that carry security, voice, and video traffic across industrial networks in sectors such as automotive, oil and gas, mining, transportation, and energy, using Cisco Resilient Ethernet Protocol (REP) and Media Redundancy Protocol (MRP) rings for resiliency rather than switch stacking. The IE-2000-16TC-G-L is the 16-port data-only configuration at the LAN Lite tier with Gigabit combo uplinks, the Layer 2 baseline that provides REP and MRP ring protection, EtherNet/IP and PROFINET support, IGMP snooping, and core security such as SSH, SNMPv3, TACACS+, and RADIUS. Its Gigabit uplinks distinguish it from the Fast Ethernet IE-2000-16TC-L, while stepping up to the LAN Base tier adds 802.1x, ACLs, QoS, DHCP snooping, IPv4 static routing, and MODBUS TCP/IP; full dynamic routing requires the separately purchased IP Lite upgrade license. Dual DC power inputs and alarm relays keep it serviceable in always-on industrial cabinets.

Technical Details

The Cisco IE 2000 IE-2000-16TC-G-L is a Layer 2 managed, hardened DIN-rail industrial Ethernet switch with 16 Fast Ethernet (10/100) copper downlinks, two Gigabit combo uplinks, and two Fast Ethernet SFP ports, running Cisco IOS with the perpetual LAN Lite license. Switching capacity is 7.6 Gbps and forwarding rate is 5.66 Mpps. It carries no Power over Ethernet, so all 16 copper access ports are data-only. It operates from -40°C to +70°C in a vented enclosure and uses a fanless IP30 chassis with DIN-rail mounting and dual DC power inputs. It connects industrial and OT endpoints such as PLCs, HMIs, drives, and industrial sensors on the factory floor.

Best For

The IE-2000-16TC-G-L suits factory-floor and outdoor industrial cabinets that connect non-powered OT endpoints such as PLCs, HMIs, drives, and industrial sensors and need Layer 2 access with Gigabit ring or backhaul uplinks. Its extended-temperature operating range, fanless IP30 DIN-rail design, and dual DC power inputs fit harsh environments, while the LAN Lite license covers baseline switching, security, and industrial protocols.

Not suitable if:

  • you need 802.1x, ACLs, or QoS policing, since those require at least the LAN Base license tier
  • you need IPv4 static routing or full dynamic routing, since routing requires the LAN Base tier or the separately purchased IP Lite upgrade
  • you need IEEE 1588v2 PTP time synchronization, since LAN Lite omits it and the IE-2000-16TC-G-E adds it
  • you need to power devices such as ruggedized IP cameras or industrial wireless access points, since this is a data-only switch with no Power over Ethernet
  • you need switch stacking, since the IE 2000 provides resiliency through REP and MRP rings instead

IE-2000-16TC-G-L Specifications

Class & Licensing
License TierLAN Lite
License Detail / MTBFLAN Lite; MTBF 374,052 hours
Ports & Uplinks
Port SpeedFast Ethernet
Uplink Configuration2x 1G Combo
Performance & Scale
StackingNo
Switching Capacity7.6 Gbps
Forwarding Rate5.66 Mpps
MAC Table8000
Hardware & Memory
DRAM256 MB
Flash64 MB
Power & Thermal
Power Input / PSUDual-input DC; external DIN-rail power supply
Redundant PSUYes (dual DC inputs)
CoolingFanless
Physical & Environmental
Dimensions (H x W x D)5.1 x 5.0 x 5.26 in (130 x 127 x 134 mm)
Weight4.35 lb (1.97 kg)
Operating Temperature-40°C to +70°C (vented enclosure); -40°C to +60°C (sealed enclosure); -34°C to +75°C (fan/blower-equipped enclosure)
Operating SystemCisco IOS

Part Number Decode

  • IE-2000 — IE-2000 is the platform prefix, identifying the Cisco Industrial Ethernet 2000 Series of managed, ruggedized DIN-rail switches running Cisco IOS.
  • 16 — 16 is the downlink count, indicating 16 Fast Ethernet (10/100) copper access ports.
  • TC — TC is the port-configuration marker, indicating copper Fast Ethernet downlinks with combo uplink ports that accept either an SFP transceiver or an RJ45 connection.
  • G — G is the Gigabit marker, indicating the two combo uplink ports operate at Gigabit (1000 Mbps) speed; without it the uplinks are 100 Mbps Fast Ethernet.
  • L — L is the license suffix for the perpetual LAN Lite tier, the Layer 2 baseline feature set.

Add-ons

Image Part Number Product Title Price Add to cart
Cisco GLC-ZX-SMD Transceiver Module GLC-ZX-SMD Cisco GLC-ZX-SMD Transceiver Module $2,893.00
Cisco GLC-FE-100FX Transceiver Module GLC-FE-100FX Cisco GLC-FE-100FX Transceiver Module $182.00
Cisco GLC-T Transceiver Module GLC-T Cisco GLC-T Transceiver Module $189.00
Cisco GLC-TE 1000BASE-T SFP — 100 m RJ-45 Copper GLC-TE Cisco GLC-TE 1000BASE-T SFP — 100 m RJ-45 Copper $216.00
Cisco GLC-BX-D Transceiver Module GLC-BX-D Cisco GLC-BX-D Transceiver Module $942.00
Cisco GLC-BX-U Transceiver Module GLC-BX-U Cisco GLC-BX-U Transceiver Module $942.00
Cisco GLC-T-RGD= Transceiver Module GLC-T-RGD Cisco GLC-T-RGD= Transceiver Module $300.00 View
Cisco GLC-FE-T-I Transceiver Module GLC-FE-T-I Cisco GLC-FE-T-I Transceiver Module $298.00 View

FAQ

Does the Cisco IE 2000 IE-2000-16TC-G-L support PoE?

No. The Cisco IE 2000 IE-2000-16TC-G-L is a data-only switch. All 16 Fast Ethernet copper access ports and both Gigabit uplink ports carry no Power over Ethernet, so it cannot power devices such as ruggedized IP cameras, industrial wireless access points, or IP phones. If you need PoE with the same 16 copper downlinks and Gigabit uplinks, the IE-2000-16PTC-G-L provides four PoE and PoE+ ports, with PoE power drawn from the external DIN-rail power supply.

What transceivers do the IE-2000-16TC-G-L uplinks use?

The IE-2000-16TC-G-L has two Gigabit combo uplink ports (SFP or RJ45) plus two dedicated Fast Ethernet SFP ports. The combo slots take 1 Gigabit SFP optics and the dedicated SFP ports take 100 Mbps Fast Ethernet optics; neither supports 10G SFP+ optics. Cisco lists industrial-temperature (-RGD or -I) SFPs for these ports. Specific transceiver compatibility should be verified against the manufacturer's transceiver compatibility matrix at tmgmatrix.cisco.com. Transceivers are sold separately.

What is the difference between the IE-2000-16TC-G-L and the IE-2000-16TC-G-E?

The two switches share identical hardware, with 16 Fast Ethernet copper downlinks, two Gigabit combo uplinks, and two Fast Ethernet SFP ports, and differ in license tier. The -L model ships with LAN Lite, the Layer 2 baseline covering REP and MRP rings, IGMP snooping, EtherNet/IP, PROFINET, and SSH, SNMPv3, TACACS+, and RADIUS security. The -E model ships with LAN Base plus IEEE 1588v2 PTP, adding 802.1x, ACLs, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, QoS policing and shaping, IPv4 static routing, IPv6 host support, and MODBUS TCP/IP, and is upgradable to L2NAT or IP Lite.

Can the IE-2000-16TC-G-L do Layer 3 routing?

The IE-2000-16TC-G-L is a Layer 2 switch and does not perform IP routing at the LAN Lite tier. IPv4 static routing becomes available with the LAN Base tier, and full dynamic routing (RIP, OSPF, EIGRP, VRF Lite, and PIM multicast) requires the separately purchased IP Lite upgrade license. Layer 2 NAT (L2NAT) is available on Enhanced LAN Base models. No dynamic routing protocol, and no BGP, is available on this LAN Lite switch.

Can the IE-2000-16TC-G-L be stacked?

No. The Cisco IE 2000 Series does not support switch stacking. The IE-2000-16TC-G-L is a standalone switch, and Cisco provides industrial network resiliency through Resilient Ethernet Protocol (REP) and Media Redundancy Protocol (MRP) ring topologies, together with dual DC power inputs and alarm relays, rather than through a stack backplane. It cannot be combined with other IE 2000 units into a single logical stacked switch.

What are the environmental and mounting specifications of the IE-2000-16TC-G-L?

The IE-2000-16TC-G-L is built for harsh industrial environments. It operates from -40°C to +70°C in a vented enclosure, -40°C to +60°C in a sealed enclosure, and -34°C to +75°C in a fan- or blower-equipped enclosure. It uses a fanless IP30-rated metal chassis and mounts on a standard DIN rail. It accepts dual DC power inputs for supply redundancy and provides alarm relay I/O. Rated mean time between failures (MTBF) is 374,052 hours, and it carries a five-year limited hardware warranty from Cisco.

Does the IE-2000-16TC-G-L require a subscription to operate?

No. The switch runs on its included perpetual Cisco IOS LAN Lite license indefinitely. A Cisco Catalyst Center Essentials term subscription (3-, 5-, or 7-year) is optional and adds centralized management, assurance, and automation; the switch keeps forwarding and switching on its base license whether or not that subscription is active. Cisco Catalyst Center Advantage is not available on the IE 2000 Series.

Is the Cisco IE 2000 IE-2000-16TC-G-L end of life?

Yes. Cisco has published an official End-of-Sale and End-of-Life announcement for the Cisco Industrial Ethernet 2000 Series, which includes the IE-2000-16TC-G-L. The last day to order the affected switches directly from Cisco was July 26, 2024, and Cisco's Last Day of Support is July 31, 2029 for customers with active service contracts. Cisco's migration guidance points to the Cisco Catalyst IE3300 Rugged Series, part of the Catalyst IE3x00 rugged family, as the recommended replacement. New units remain available through channel inventory.

What condition is the IE-2000-16TC-G-L sold in, and what warranty applies?

The Cisco IE 2000 IE-2000-16TC-G-L is sold new and factory-sealed. It is covered by a Network Devices Inc. one-year warranty and a 30-day return policy.

Reviews