| Specifications |
AXIS V5925 60 Hz PTZ Network Camera |
| Camera |
| Image sensor |
Progressive scan RGB CMOS 1/2.8" |
| Lens |
4.4–132 mm, F1.4-4.6 |
| Horizontal field of view: 62°–2.3° |
| Vertical field of view: 37°–1.3° |
| Autofocus, P-iris control |
| Day and night |
Automatically removable infrared-cut filter |
| Minimum illumination |
Color: 1.0 lux at 30 IRE F1.4 |
| B/W: 0.03 lux at 30 IRE F1.4 |
| Shutter speed |
1/10000 s to 1 s |
| Pan/Tilt/Zoom |
Pan: ±170°, 0.2-100°/s |
| Tilt: -20° - 90°, 0.2-90°/s |
| Zoom: 30x Optical, 12x Digital, Total 360x |
| 256 presets positions, Control queue, On-screen directional |
| indicator, Adjustable zoom speed, PTZ response profiles |
| System on chip (SoC) |
| Model |
ARTPEC-7 |
| Memory |
1 GB RAM, 512 MB Flash |
| Video |
| Video compression |
H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High Profiles |
| H.265 (MPEG-H Part 2/HEVC) Main Profile |
| Motion JPEG |
| Resolution |
1920x1080 HDTV 1080p to 160x90 |
| HDMI/SDI Output: |
| 1080p@50/60 fps (50/60 Hz) |
| Frame rate |
Up to 60/50 fps (60/50 Hz) in all resolutions |
| Video streaming |
Multiple, individually configurable streams in H.264, H.265 and |
| Motion JPEG |
| Axis Zipstream technology in H.264 and H.265 |
| Controllable frame rate and bandwidth |
| VBR/ABR/MBR H.264/H.265 |
| HDMI |
| HD-SDI: SMPTE 292 |
| 3G-SDI: SMPTE 424, SMPTE 425 (3G-SDI mapping supports |
| Level A / Level B dual link mapping) |
| Image settings |
Saturation, brightness, sharpness, white balance, day/night |
| threshold, exposure mode, exposure zones, defogging, rotation: |
| 0°, 180° |
| Audio |
| Audio streaming |
Two-way, stereo |
| HD-SDI: SMPTE ST 299-1 |
| 3G-SDI: SMPTE ST 299-2 |
| Audio encoding |
SDI: AES3 24 bit, 48 kHz |
| HDMI: LPCM |
| Network: AAC LC 8/16/32/44.1/48 kHz, G.711 PCM 8 kHz, |
| G.726 ADPCM 8 kHz, Opus 8/16/48 kHz, LPCM 48 kHz, |
| Configurable bit rate |
| XLR input |
2 balanced inputs (left/right) |
| Microphone phantom power 48 V |
| Balanced external microphone |
| Balanced line level |
| Line input impedance: >10 kOhm |
| Maximum input level: 4.4 Vrms |
| Bandwidth: 20 Hz - 20 kHz (±3 dB), may be limited by sample |
| rate |
| THD+N: < 0.03% |
| Signal-to-Noise ratio: > 85 dB @ 0 dB gain, > 78 dB @ |
| 30 dB gain |
| 3.5 mm input |
Microphone Power 5 V via 2.2 kOhm |
| Unbalanced external microphone |
| Unbalanced line |
| Line input impedance: >10 kOhm |
| Maximum input level: 2.2 Vrms |
| Bandwidth: 20 Hz - 20 kHz (±3 dB), may be limited by sample |
| rate |
| THD+N: < 0.03% |
| Signal-to-Noise ratio: > 87 dB @ 0 dB gain, > 83 dB @ |
| 30 dB gain |
| 3.5 mm output |
3.5 mm unbalanced stereo output |
| Output impedance: < 100 Ohm, short circuit proof |
| Maximum output level: > 0.707 Vrms |
| Bandwidth: 20 Hz - 20 kHz (±3 dB), may be limited by sample rate |
| THD+N: < 0.03% @ 10 kOhm load |
| Signal-to-Noise ratio: > 87 dB |
| SDI output |
Bandwidth: 20 Hz - 20 kHz (±3 dB) |
| THD+N: < 0.03% |
| Signal-to-Noise ratio: > 87 dB |
| HDMI output |
Bandwidth: 20 Hz - 20 kHz (±3 dB) |
| THD+N: < 0.03% |
| Signal-to-Noise ratio: > 87 dB |
| Network |
| Network protocols |
IPv4/v6, ICMPv4/ICMPv6, HTTP, HTTP/2, HTTPS, TLS, QoS Layer 3 |
| DiffServ, FTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnPTM, SNMP |
| v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, NTS, RTSP, RTP, SFTP, |
| TCP, UDP, IGMPv1/v2/v3, RTCP, ICMP, DHCPv4/v6, ARP, SSH, SIP, |
| LLDP, CDP, MQTT, Secure Syslog (RFC 3164/5424, UDP/TCP/TLS), |
| Link-Local address (ZeroConf), HDMI, 3G-SDI, VISCA |
| System Integration |
| Application Programming Interface |
Open API for software integration, including VAPIX® and |
| AXIS Camera Application Platform; specifications at axis.com |
| One-click cloud connection |
| ONVIF® Profile G, ONVIF® Profile M, ONVIF® Profile S, |
| ONVIF® Profile T, specification at onvif.org |
| Support for Session Initiation Protocol (SIP) for integration with |
| Voice over IP (VoIP) systems, peer-to-peer or integrated with |
| SIP/PBX. |
| Event conditions |
Analytics, external input, edge storage events, virtual inputs |
| through API |
| Audio: audio detection |
| Call: state, state change |
| Device status: above operating temperature, above or below |
| operating temperature, below operating temperature, fan failure, |
| IP address removed, network lost, new IP address, storage failure, |
| system ready, within operating temperature |
| Edge storage: recording ongoing, storage disruption |
| I/O: digital input, manual trigger, virtual input |
| MQTT subscribe |
| PTZ: PTZ malfunctioning, PTZ movement, PTZ preset position |
| reached, PTZ ready |
| Scheduled and recurring: scheduled event |
| Video: average bitrate degradation, live stream open |
| Event actions |
MQTT publish |
| Record video: SD card and network share |
| Upload of images or video clips: FTP, SFTP, HTTP, HTTPS, network |
| share and email |
| Pre- and post-alarm video or image buffering for recording or |
| upload |
| Notification: email, HTTP, HTTPS, TCP and SNMP trap |
| PTZ: PTZ preset |
| Overlay text, external output activation, play audio clip, zoom |
| preset, day/night mode, make call |
| Data streaming |
Event data |
| Built-in installation aids |
Pixel counter, leveling guide |
| Analytics |
| Applications |
Included |
| AXIS Video Motion Detection, AXIS PTZ Autotracking |
| Support for AXIS Camera Application Platform enabling |
| installation of third-party applications, see axis.com/acap |
| Cybersecurity |
| Edge security |
Software: Signed firmware, brute force delay protection, digest |
| authentication and OAuth 2.0 RFC6749 OpenID Authorization |
| Code Flow for centralized ADFS account management, password |
| protection, AES-XTS-Plain64 256bit SD card encryption |
| Hardware: Secure boot |
| Network security |
IEEE 802.1X (EAP-TLS, PEAP-MSCHAPv2), HTTPS/HSTS, TLS |
| v1.2/v1.3, Network Time Security (NTS), X.509 Certificate PKI, |
| IP address filtering |
| Documentation |
AXIS OS Hardening Guide |
| Axis Vulnerability Management Policy |
| Axis Security Development Model |
| AXIS OS Software Bill of Material (SBOM) To download documents, go to axis.com/support/cybersecurity/resources To read more about Axis cybersecurity support, go to axis.com/cybersecurity |
| General |
| Casing |
ASA plastic cover |
| Color: White NCS S 1002-B |
| Power |
11–13 V DC (12 V power supply included), typical 14 W, max 25 W |
| Connectors |
RJ45 10BASE-T/100BASE-TX |
| Terminal block for 2 configurable alarm input/output |
| 3.5 mm stereo mic/line in, 3.5 mm stereo line out |
| XLR-3 (left + right) mic/line in (with 48 V phantom power) |
| HDMI Type A, BNC for SDI |
| DC input |
| RS232 serial connector for VISCA |
| Storage |
Support for microSD/microSDHC/microSDXC card |
| Support for SD card encryption (AES-XTS-Plain64 256bit) |
| Recording to network-attached storage (NAS) |
| For SD card and NAS recommendations see axis.com |
| Operating conditions |
0 °C to 40 °C (32 °F to 104 °F) |
| Humidity 10-85% RH (non-condensing) |
| Storage conditions |
(-40 °C to 65 °C) (-40 °F to 149 °F) |
| Humidity 5 - 95% RH (non-condensing) |
| Approvals |
EMC |
| EN 55032 Class A, EN 55035, EN 61000-3-2, EN 61000-3-3, |
| EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, |
| ICES-3(A)/NMB-3(A), VCCI Class A, RCM AS/NZS CISPR 32 Class A , |
| KC KN32 Class A, KC KN35 |
| Safety |
| IEC/EN/UL 62368-1, CAN/CSA C22.2 No. 62368-1, KC-Mark, |
| IS 13252 |
| Environment |
| IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, |
| IEC 60068-2-27, IEC 60068-2-78 |
| Network |
| NIST SP500-267 |
| Dimensions |
Height: 180 mm (7.1 in) |
| ø 136 mm (5.4 in) |
| Weight |
1.5 kg (3.3 lb) |
| Included accessories |
Power supply, wall/ceiling mount, terminal connector for I/O, |
| installation guide, Windows® |
| decoder user license, Camstreamer |
| 3-month trial |
| Languages |
English, German, French, Spanish, Italian, Russian, Simplified |
| Chinese, Japanese, Korean, Portuguese, Traditional Chinese, |
| Dutch, Czech, Swedish, Finnish, Turkish, Thai, Vietnamese |
