You have no items in your shopping cart.
Cisco Catalyst Switches
Cisco Catalyst 2960-L Series Switches
Cisco Catalyst 2960-L Series Switches are fixed and smart-managed Gigabit Ethernet switches that provide enterprise-class access switching. They are especially useful for:
- Branch offices
- Out-of-the-wiring-closet applications
- Critical Internet of Things (IoT) deployments
- Small and medium-sized businesses
They operate on Cisco IOS Software and support simple device management and network management via Command Line Interface (CLI) as well as an on-box web interface.
-
Save $2,986.52CISCO WS-C2960L-24TQ-LL SWITCH
CISCO WS-C2960L-24TQ-LL SWITCH
$1,342.48$4,329.00- Switch
- Managed
- 24 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+
- Desktop
- Rack-mountable
RJ45 Ethernet 1 USB mini-B 1 USB-A port for storage and Bluetooth console 1 CPU ARMv7 800 MHz DRAM 512 MB Flash memory 256 MB Forwarding bandwidth 64 Gbps Switching bandwidth 128 Gbps Forwarding rate (64-byte L3 packets) 41.67 Mpps Unicast MAC addresses 8K Maximum active VLANs 64 VLAN IDs available 4094 Maximum STP instances 64 Maximum SPAN sessions 1 MTU-L3 packet 9198 bytes Jumbo Ethernet frame 10,240 bytes MTBF in hours (Data) 2,412,947 MTBF in hours (PoE) 909,838 Up to 5,000 ft 23F to 113F (-5C to 45C) Up to 10,000 ft 23F to 104F (-5C to 40C) Operating altitude 10,000 ft (3000m) Operating relative humidity 5% to 90% at 40C Storage temperature -13 to 158F (-25 to 70C) Storage altitude 15,000 ft (4500m) Storage relative humidity 5% to 95% at 65C Storage altitude Minimum ambient temperature for cold start is 0C (32F) Electrical Data Voltage (autoranging) 110 to 220V AC in Frequency 50 to 60 Hz Current 0.20A to 0.33A Power rating (maximum consumption) 0.06 kVA Power consumption (watts)
0% traffic
10% traffic
100% traffic
Weighted average19.4
26.5
26.5
24.1Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 EMC: emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A EMC: immunity EN55024, CISPR24, EN300386, KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code U.S. government certifications USGv6 and IPv6 Ready Logo Ethernet interfaces 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cablingIndicator LEDs Per-port status: link integrity, disabled, activity, speed, and full duplex
System status: system, PoE, and link speedConsole cables CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectorsPower Use the supplied AC power cord to connect the AC power connector to an AC power outlet Install Cisco WS-C2960L-24TQ-LL Switch for Great Value Solutions
Cisco WS-C2960L-24TQ-LL Switch features IOS Lan lite, 64 Gbps and 128 Gbps forwarding and switching bandwidth respectively, and 4 x 10G SFP Uplink Interfaces, with 512 MB DRAM.
Key Benefits of Cisco WS-C2960L-24TQ-LL Switch
Cisco WS-C2960L-24TQ-LL Switch is designed for simplified operations, the best-in-class reliability, and maximum better mobile experience for its users. It supports 2960-L Power over Ethernet (PoE) and all necessary applications to add a great value.
Cisco WS-C2960L-24TQ-LL Switch Overview
IOS LAN Lite Forwarding bandwidth 64 Gbps Switching bandwidth 128 Gbps 10/100/1000 Ethernet Ports 24 Uplink Interfaces 4 x 10G SFP Fanless Y DRAM 512 MB Flash memory 256 MB Dimensions (H x D x W) 1.73 x 9.45 x 17.5 in. (4.4 x 24 x 44.5 cm) Net Weight 6.06 lb (2.75 kg) -
Save $841.17CISCO WS-C2960L-8TS-LL SWITCH
CISCO WS-C2960L-8TS-LL SWITCH
$395.00$1,236.17- Switch
- managed
- 8 x 10/100/1000 + 2 x Gigabit SFP (uplink)
- desktop
- rack-mountable
10/100/1000 Ethernet Ports 8 Uplink Interfaces 2 SFP Fanless Y Dimensions (H x D x W) 1.73 x 8.45 x 10.56 in. (4.4 x 21.5 x 26.8 cm) Net Weight 4.45 lb (2.02 kg) RJ45 Ethernet 1 USB mini-B 1 USB-A port for storage and Bluetooth console 1 CPU ARMv7 800 MHz DRAM 512 MB Flash memory 256 MB Forwarding bandwidth 10 Gbps Switching bandwidth 20 Gbps Forwarding rate (64-byte L3 packets) 14.88 Mpps Unicast MAC addresses 8K Maximum active VLANs 64 VLAN IDs available 4094 Maximum STP instances 64 Maximum SPAN sessions 1 MTU-L3 packet 9198 bytes Jumbo Ethernet frame 10,240 bytes MTBF in hours (Data) 2,448,133 MTBF in hours (PoE) 315,044 Up to 5,000 ft 23F to 113F (-5C to 45C) Up to 10,000 ft 23F to 104F (-5C to 40C) Operating altitude 10,000 ft (3000m) Operating relative humidity 5% to 90% at 40C Storage temperature -13 to 158F (-25 to 70C) Storage altitude 15,000 ft (4500m) Storage relative humidity 5% to 95% at 65C Storage altitude Minimum ambient temperature for cold start is 0C (32F) Electrical Data Voltage (autoranging) 110 to 220V AC in Frequency 50 to 60 Hz Current 0.13A to 0.22A Power rating (maximum consumption) 0.04 kVA Power consumption (watts)
0% traffic
10% traffic
100% traffic
Weighted average13.0
14.8
14.9
14.2Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 EMC: emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A EMC: immunity EN55024, CISPR24, EN300386, KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code U.S. government certifications USGv6 and IPv6 Ready Logo Ethernet interfaces 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cablingIndicator LEDs Per-port status: link integrity, disabled, activity, speed, and full duplex
System status: system, PoE, and link speedConsole cables CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectorsPower Use the supplied AC power cord to connect the AC power connector to an AC power outlet Cisco WS-C2960L-8TS-LL Switch for Operational Simplicity
Cisco WS-C2960L-8TS-LL Switch is a fixed managed and Gigabit Ethernet switch. It provides enterprise-class access switching for branch offices, out-of-the-wiring-closet applications, and critical Internet of Things (IoT) deployments, as well as small and medium-sized businesses.
Key Benefits of Cisco WS-C2960L-8TS-LL SwitchCisco WS-C2960L-8TS-LL Switch is built to simplify operations, get the reliability you need, and deliver better mobile experiences to your employees and customers. It provides a range of security features to limit access to the network and mitigate threats.
-
Save $603.32CISCO WS-C2960L-8PS-LL SWITCH
CISCO WS-C2960L-8PS-LL SWITCH
$818.68$1,422.00- Switch
- managed
- 8 x 10/100/1000 + 2 x Gigabit SFP (uplink)
- desktop
- rack-mountable
- PoE+ (67 W)
10/100/1000 Ethernet Ports 8 Uplink Interfaces 2 SFP Available PoE Power 67W RJ45 Ethernet 1 USB mini-B 1 USB-A port for storage and Bluetooth console 1 CPU ARMv7 800 MHz DRAM 512 MB Flash memory 256 MB Forwarding bandwidth 10 Gbps Switching bandwidth 20 Gbps Forwarding rate (64-byte L3 packets) 14.88 Mpps Unicast MAC addresses 8K Maximum active VLANs 64 VLAN IDs available 4094 Maximum STP instances 64 Maximum SPAN sessions 1 MTU-L3 packet 9198 bytes Jumbo Ethernet frame 10,240 bytes MTBF in hours (Data) 2,448,133 MTBF in hours (PoE) 315,044 Up to 5,000 ft 23F to 113F (-5C to 45C) Up to 10,000 ft 23F to 104F (-5C to 40C) Operating altitude 10,000 ft (3000m) Operating relative humidity 5% to 90% at 40C Storage temperature -13 to 158F (-25 to 70C) Storage altitude 15,000 ft (4500m) Storage relative humidity 5% to 95% at 65C Storage altitude Minimum ambient temperature for cold start is 0C (32F) Electrical PoE Voltage (autoranging) 110 to 220V AC in Frequency 50 to 60 Hz Current 0.22A to 0.27A Power rating (maximum consumption) 0.11 kVA Power consumption (watts)
0% traffic
10% traffic
100% traffic
Weighted average19.9
22.0
22.0
21.3Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 EMC: emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A EMC: immunity EN55024, CISPR24, EN300386, KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code U.S. government certifications USGv6 and IPv6 Ready Logo Ethernet interfaces 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cablingIndicator LEDs Per-port status: link integrity, disabled, activity, speed, and full duplex
System status: system, PoE, and link speedConsole cables CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectorsPower Use the supplied AC power cord to connect the AC power connector to an AC power outlet Enterprise-class Cisco WS-C2960L-8PS-LL Switch
Cisco WS-C2960L-8PS-LL Switch features fixed-configuration. This Gigabit Ethernet switch provides Layer 2 and basic Layer 3 enterprise-class access switching for branch offices, conventional workspaces, and out-of-the-wiring-closet applications.
Key Benefits of Cisco WS-C2960L-8PS-LL Switch
Cisco WS-C2960L-8PS-LL Switch is Cisco iOS Software based switch. It is fan-less, easy-to-use, energy efficient, cost-effective, reliable, and secure. This Cisco Catalyst 2960-L Series Switch includes a single fixed power supply.
Product Code WS-C2960L-8PS-LL IOS LAN Lite Forwarding bandwidth 10 Gbps Switching bandwidth 20 Gbps 10/100/1000 Ethernet Ports 8 PoE+ Ports Available PoE Power 67W Uplink Interfaces 2 x 1G SFP Fanless Y DRAM 512MB Flash memory 256MB Dimensions (H x D x W) 1.73 x 9.45 x 10.56 in. (4.4 x 24 x 26.8 cm) Net Weight 5.64 lb (2.56 kg) -
Sold OutCISCO WS-C2960L-48TQ-LL SWITCH
CISCO WS-C2960L-48TQ-LL SWITCH
$3,197.30$6,366.00- Switch
- managed
- 48 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+
- desktop
- rack-mountable
RJ45 Ethernet 1 USB mini-B 1 USB-A port for storage and Bluetooth console 1 CPU ARMv7 800 MHz Forwarding rate (64-byte L3 packets) 77.38 Mpps Unicast MAC addresses 8K Maximum active VLANs 64 VLAN IDs available 4094 Maximum STP instances 64 Maximum SPAN sessions 1 MTU-L3 packet 9198 bytes Jumbo Ethernet frame 10,240 bytes MTBF in hours (Data) 1,370,769 MTBF in hours (PoE) 437,970 Up to 5,000 ft 23F to 113F (-5C to 45C) Up to 10,000 ft 23F to 104F (-5C to 40C) Operating altitude 10,000 ft (3000m) Operating relative humidity 5% to 90% at 40C Storage temperature -13 to 158F (-25 to 70C) Storage altitude 15,000 ft (4500m) Storage relative humidity 5% to 95% at 65C Storage altitude Minimum ambient temperature for cold start is 0C (32F) Electrical Data Voltage (autoranging) 110 to 220V AC in Frequency 50 to 60 Hz Current 0.29A to 0.48A Power rating (maximum consumption) 0.09 kVA Power consumption (watts)
0% traffic
10% traffic
100% traffic
Weighted average29.7
41.1
41.1
37.3Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 EMC: emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A EMC: immunity EN55024, CISPR24, EN300386, KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code U.S. government certifications USGv6 and IPv6 Ready Logo Ethernet interfaces 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cablingIndicator LEDs Per-port status: link integrity, disabled, activity, speed, and full duplex
System status: system, PoE, and link speedConsole cables CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectorsPower Use the supplied AC power cord to connect the AC power connector to an AC power outlet Use Cisco WS-C2960L-48TQ-LL Switch for Operational Simplicity
Cisco WS-C2960L-48TQ-LL Switch is a managed switch, featuring 48 x 10/100/1000 + 4 x 1 Gigabit / 10 Gigabit SFP+, rack-mountable.
Key Benefits of Cisco WS-C2960L-48TQ-LL Switch
Cisco WS-C2960L-48TQ-LL Switch is designed to simplify operations and provide reliability and deliver better mobile experiences to users. It supports Power over Ethernet (PoE) and makes users’ network ready for mobile devices and applications.
IOS WS-C2960L-48TQ-LL Forwarding bandwidth 88 Gbps Switching bandwidth 176 Gbps 10/100/1000 Ethernet Ports 48 Uplink Interfaces 4 x 10G SFP Fanless Y DRAM 512 MB Flash memory 256 MB Dimensions (H x D x W) 1.73 x 9.45 x 17.5 in. (4.4 x 24 x 44.5 cm) Net Weight 6.68 lb (3.03 kg) -
Sold OutCISCO WS-C2960L-24TS-LL SWITCH
CISCO WS-C2960L-24TS-LL SWITCH
$1,195.00$2,238.14- LAN Lite
- Data
- 4 SFP or SFP+ uplinks
- Fanless
RJ45 Ethernet 1 USB mini-B 1 USB-A port for storage and Bluetooth console 1 CPU ARMv7 800 MHz Forwarding rate (64-byte L3 packets) 41.67 Mpps Unicast MAC addresses 8K Maximum active VLANs 64 VLAN IDs available 4094 Maximum STP instances 64 Maximum SPAN sessions 1 MTU-L3 packet 9198 bytes Jumbo Ethernet frame 10,240 bytes MTBF in hours (Data) 2,412,947 MTBF in hours (PoE) 909,838 Up to 5,000 ft 23F to 113F (-5C to 45C) Up to 10,000 ft 23F to 104F (-5C to 40C) Operating altitude 10,000 ft (3000m) Operating relative humidity 5% to 90% at 40C Storage temperature -13 to 158F (-25 to 70C) Storage altitude 15,000 ft (4500m) Storage relative humidity 5% to 95% at 65C Storage altitude Minimum ambient temperature for cold start is 0C (32F) Electrical Data Voltage (autoranging) 110 to 220V AC in Frequency 50 to 60 Hz Current 0.20A to 0.33A Power rating (maximum consumption) 0.06 kVA Power consumption (watts)
0% traffic
10% traffic
100% traffic
Weighted average19.4
26.5
26.5
24.1Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 EMC: emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A EMC: immunity EN55024, CISPR24, EN300386, KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code U.S. government certifications USGv6 and IPv6 Ready Logo Ethernet interfaces 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cablingIndicator LEDs Per-port status: link integrity, disabled, activity, speed, and full-duplex
System status: system, PoE, and link speedConsole cables CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectorsPower Use the supplied AC power cord to connect the AC power connector to an AC power outlet Install Cisco WS-C2960L-24TS-LL Switch for Security, Reliability & Optimum Operational Convenience
Cisco WS-C2960L-24TS-LL Switch is one of the Cisco Catalyst 2960-L Series Switches. It offers fixed-configuration and 24 x Gigabit Ethernet ports, 4 x 1G SFP and LAN Lite.
Key Benefits of Cisco WS-C2960L-24TS-LL Switch
Cisco WS-C2960L-24TS-LL Switch is designed for simplifying operations and lowering total cost of ownership. It enables secure, easy-to-use, fanless operation, and energy-efficient business operations with a range of Cisco IOS Software features. Get Layer 2 and basic Layer 3 enterprise-class access switching solutions for branch offices, conventional workspaces, and out-of-the-closet applications.
IOS LAN Lite Forwarding bandwidth 28 Gbps Switching bandwidth 56 Gbps 10/100/1000 Ethernet Ports 24 Uplink Interfaces 4 x 1G SFP Fanless Y DRAM 512 MB Flash memory 256 MB Dimensions (H x D x W) 1.73 x 9.45 x 17.5 in. (4.4 x 24 x 44.5 cm) Net Weight 6.61 lb (3.0 kg)
