JUNIPER CTP151-AC ROUTER

Accessories

CTP151 Common Interface Modules
CTP150-IM-SER	4-port serial module with 4 HD-26 pin interfaces and one clock input interface. Serial supports RS- 232/V.24, EIA530/530A/RS-422/499/X.21, V.35.
CTP150-IM-SER-MS	4-port serial module with 4 HD-26 pin interfaces and one clock input interface. Includes two daughter cards to add 4WTO analog, high-quality analog and IRIG capabilities to two ports.
CTP150-IM-T1E1	4-port T1/E1 module with 4 RJ-48 interfaces and one clock input interface
CTP151 Common Spares
CTP150-CBL-DB15-DCE-F	HD-26 interface cable, DB15, DCE, Female
CTP150-CBL-DB15- DTE-M	HD-26 interface cable, DB15, DTE, Male
CTP150-CBL-DB25-DCE-F	HD-26 interface cable, DB25, DCE, Female
CTP150-CBL-DB25-DCE-Y	Y-cable with DCE DB25 connectors
CTP150-CBL-DB25- DTE-M	HD-26 Interface cable, DB25, DTE, Male
CTP150-CBL-RJ45-DIU	HD-26 Interface cable, RJ45, V.24

Specifications

Specifications	ACX6160-T-AC
Operating temperature	32° to 104° F (0° to 40° C)
Humidity	5%-90% RH noncondensing
Platform Features
Software circuit provisioning	EIA530, RS-232, V.35, 4WTO, T1, and E1 circuit types are software configured including the line encoding, clocking, rates, and IP settings.
Scalable product family	A family of four CTP Series Circuit to Packet Platforms provides different port densities. Products can address the requirements of small remote sites through large central network hubs.
CTPView Network Management System	Secure, multi-user, web-based network management system provides network monitoring, circuit provisioning, IP performance reporting, database backup, and circuit troubleshooting tools.
Multiple system and circuit clocking solutions	CTP Series Circuit to Packet Platforms are designed to use multiple external clocks as monitored and prioritized system references. Circuits are configured to use the system clock, external circuit timing, or to adaptively recover clock information from the remote port when required by the application or when no reference is configured.
Auto switch	The status of the CTP Series circuit ports is monitored, and the circuit is automatically switched to an alternate local or remote port when a failure is detected.
Packet protector	Redundant packets are created and transmitted to the IP network and then processed by the receiving CTP Series.
Autobaud	The input timing leads are monitored, and the circuit rate is automatically changed at both ends of the network if a rate change is detected.
Loops and BERTs	Each CTP Series port supports interface and network loops and the ability to generate and monitor a bit error rate test with up to nine BERT patterns selectable.
Layer 2 Serial-to-Ethernet IP aggregation	The CTP Series Circuit to Packet Platforms can aggregate layer 2 traffic from serial interfaces onto a Fast Ethernet or Gigabit Ethernet interface. Layer 2 protocols supported are Frame Relay, PPP and Cisco-HDLC. Each CTP Series port is connected to a different VLAN.
Port mirroring	The CTP Series is able to port-mirror any transmit or any receive up to 10 local or remote destinations.
Analog voice4WE&M	The CTP Series supports analog 4WE&M type I, II,and V interfaces with software selectable transmit and receive-level adjustments per interface.
Analog voice2WFXS	The CTP Series supports analog 2WFXS loop start, ground start, and PLAR modes with software selectable transmit and receive-level adjustments per interface.
Analog voice2WFXO	The CTP Series support analog 2WFXO loop start and ground start modes with software selectable transmit and receive-level adjustments per interface.
IRIG-B	The CTP Series supports an inter-range instrumentation group time code (IRIG-B) signal to be transported through an IP network. IRIG-B encodes day of year, hour, minute, and second data on a 1-KHz carrier frequency, with an update rate of once per second.
Primary Circuit to Packet Solutions
SS7 transport over IP	Provides transport of dedicated T1 or E1 SS7 links over the IP/ MPLS network.
TDM over IP solution	The provisioning of point-to-point TDM trunks over the IP network does not require changes to the TDM equipment.
PBX interconnect over IP solution	Provides E1 and T1 trunking for PBX interconnection over the IP network.
PBX Extension over IP with 2WFXS/2WFXO	Provides two-wire analog PBX to phone extensions over IP and two-wire PBX to PBX/central office connections over IP. Private- line automatic ringdown (PLAR) is also supported.
Leased line extension over IP solution	Supports standards-based encapsulation and DS0 bundling. IETF PWE3 RFCs, SAToP and CESoPSN are supported.
Radio over IP solution	Allows for connectivity of analog and digital radios over IP networks.
Serial encryption over IP solution	Provides transport of KG/KIV bit-synchronous cipher text across an IP network.
T1 and E1 backup over IP	Point-to-point T1 or E1 circuits can be automatically backed up over the IP/MPLS network.

Properties

Properties	Juniper CTP151-AC
Description	AC base chassis with 4-port 10/100/1000BASE-T RJ-45 and 2-port 1GbE/10GbE SFP/SFP+
Product Family	CTP Series
Product Type	Router
Serial Interfaces
EIA-530, RS-232/V.28, RS-422/V.11, RS-423/V.10, X.21, V.35, T1, E1	Yes
IRIG-B	Yes
Encoding NRZ, Conditioned Diphase, Isochronous, Asynchronous, AMI, B8ZS, HDB3, TDM/TDC, Transparent	Yes
Interface quantity	8
Rates	50 bps12.880 Mbps
Voice Interfaces
Analog voice 4-wire TO interface quantity	4
4WE&M	N/A
2WFXS	N/A
2WFXO	N/A
T1 and E1	8
Companding conversion	N/A
IP Interfaces
10/100/1000BASE-T (RJ-45)	4
SFP 1000BASE-T	2*
SFP 1000BASE-SX	2*
SFP 1000BASE-LX	2*
Precedent setting(DSCP), configurable TOS byte	Yes
VLAN tagging	Yes
Virtual IP	Yes
Circuit modessymmetric, asymmetric, unidirectional, hairpin	Yes
IPv4 and IPv6	Yes
IETF PWE3 RFC SAToP	Yes
IETF PWE3 RFC CESoPSN	Yes
Layer 2 serial aggregation	Yes
Port mirroring	Yes
*Software support roadmap item
Dimension (WxHxD)	17.36 x 1.73 x 12 in (44.1 x 4.4 x 30.5 cm)
Weight (lb)	9.92
Mounting	Front Rack
Input voltage (AC)	100-240 VAC
Power supply	150W
Input current	0.47 A at 110 VAC

INTERNATIONAL -

International buyers must acknowledge that all duties and taxes are their sole responsibility and Network Devices Inc is not held responsible for possible additional charges.

DOMESTIC -

Products are shipped Monday through Friday via UPS/FedEx/USPS. The estimated delivery time is 1-6 business days depending on location. If “Free Shipping” is offered, it will be by Ground only and within USA Continental States Only (48 States). There will be a surcharge on shipments to Hawaii, Alaska, Puerto Rico and APO/FPO addresses. After you have made a purchase, the surcharge will be calculated using the parcel’s weight and size. Network Devices Inc ships the product the same day of receiving an order. Otherwise you will a receive notification of delay or cancellation of said order.