CISCO AIR-AP1810W-B-K9 ACCESS POINT

Model: AIR-AP1810W-B-K9
Detail: Wireless Access Point, Bluetooth 4.1 LE, 802.11ac Wave 2 (draft 5.0), Bluetooth, Wi-Fi, Dual Band, DC power
List Price: US$692.00
Price:
$148.00
You Save: $544.00 (79% OFF)
Condition: Brand New Sealed
Availability: IN STOCK
Shipping: FREE SHIPPING for all U.S orders over $100. Please call us at 201-559-1474, fill out the contact form, or chat with a live agent for other shipping methods.
Tax: $0.00 Tax Outside NJ and TX
Quantity:
+
-

The Cisco Aironet 1810W Series Access Points offer a compact, wall plate - mountable Access Point, ideal for hospitality, cruise ships, residential halls or other multi-dwelling-unit deployments. The Aironet 1810W series combines Gigabit Ethernet wired and 802.11ac Wave 2 wireless connectivity into a sleek device, built to take advantage of existing cabling infrastructure. This combination reduces the total cost of ownership with no compromise to the end-user.

Specifications

Specifications AIR-AP1800S-B-K9
Description The Cisco AIR-AP1810W-B-K9 is a compact wireless access point designed for small to medium-sized businesses, with support for the latest Wi-Fi standards, Power over Ethernet (PoE), and a range of management options.
Product Type Access Points
Authentication and security Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
802.1X, RADIUS authentication, authorization and accounting (AAA)
802.11i
Software Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.2.111.0 or later
Maximum clients Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac 2x2 single-user/multiuser MIMO with two spatial streams
Maximal ratio combining (MRC)
20-, 40- and 80-MHz channels
PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic shift diversity (CSD) support
Ethernet ports Authentication with 802.1X or MAC filtered
Dynamic VLAN or per port
Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability) Integrated Bluetooth 4.1 (including BLE) radio
Maximum transmit power: 5 dBm
Antenna gain: 2 dBi
Data rates supported 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
802.11n data rates on 2.4 GHz:
MCS Index1 GI2 = 800 ns GI = 400 ns
20-MHz Rate (Mbps) 20-MHz Rate (Mbps)
0 6,5 7,2
1 13 14,4
2 19,5 21,7
3 26 28,9
4 39 43,3
5 52 57,8
6 58,5 65
7 65 72,2
8 13 14,4
9 26 28,9
10 39 43,3
11 52 57,8
12 78 86,7
13 104 115,6
14 117 130
15 130 144,4
802.11ac data rates on 5 GHz:
MCS Index Spatial Streams GI = 800 ns GI = 400 ns
20-MHz Rate (Mbps) 40-MHz Rate (Mbps) 80-MHz Rate (Mbps) 20-MHz Rate (Mbps) 40-MHz Rate (Mbps) 80-MHz Rate (Mbps)
0 1 6,5 13,5 29,3 7,2 15 32,5
1 1 13 27 58,5 14,4 30 65
2 1 19,5 40,5 87,8 21,7 45 97,5
3 1 26 54 117 28,9 60 130
4 1 39 81 175,5 43,3 90 195
5 1 52 108 234 57,8 120 260
6 1 58,5 121,5 263,3 65 135 292,5
7 1 65 135 292,5 72,2 150 325
8 1 78 162 351 86,7 180 390
9 1 180 390 200 433,3
0 2 13 27 58,5 14,4 30 65
1 2 26 54 117 28,9 60 130
2 2 39 81 175,5 43,3 90 195
3 2 52 108 234 57,8 120 260
4 2 78 162 351 86,7 180 390
5 2 104 216 468 115,6 240 520
6 2 117 243 526,5 130 270 585
7 2 130 270 585 144,4 300 650
8 2 156 324 702 173,3 360 780
9 2 360 780 400 866,7
Maximum number of non-overlapping channels B (B regulatory domain):
2.412 to 2.462 GHz; 11 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.720 GHz; 12 channels
5.745 to 5.825 GHz; 5 channels
Receive sensitivity (combined sensitivity) 802.11b
-99 dBm @ 1 Mbps
-96 dBm @ 2 Mbps
-93 dBm @ 5.5 Mbps
-86 dBm @ 11 Mbps
802.11g
-94 dBm @ 6 Mbps
-93 dBm @ 9 Mbps
-92 dBm @ 12 Mbps
-90 dBm @ 18 Mbps
-86 dBm @ 24 Mbps
-83 dBm @ 36 Mbps
-78 dBm @ 48 Mbps
-77 dBm @ 54 Mbps
802.11a
-94 dBm @ 6 Mbps
-93 dBm @ 9 Mbps
-91 dBm @ 12 Mbps
-89 dBm @ 18 Mbps
-86 dBm @ 24 Mbps
-83 dBm @ 36 Mbps
-78 dBm @ 48 Mbps
-76 dBm @ 54 Mbps
2.4 GHz
802.11n (HT20)
-93 dBm @ MCS0
-90 dBm @ MCS1
-88 dBm @ MCS2
-84 dBm @ MCS3
-81 dBm @ MCS4
-76 dBm @ MCS5
-75 dBm @ MCS6
-74 dBm @ MCS7
-92 dBm @ MCS8
-89 dBm @ MCS9
-87 dBm @ MCS10
-83 dBm @ MCS11
-79 dBm @ MCS12
-76 dBm @ MCS13
-74 dBm @ MCS14
-73 dBm @ MCS15
5 GHz
802.11n (HT20)
-93 dBm @ MCS0
-90 dBm @ MCS1
-88 dBm @ MCS2
-84 dBm @ MCS3
-81 dBm @ MCS4
-76 dBm @ MCS5
-75 dBm @ MCS6
-73 dBm @ MCS7
-92 dBm @ MCS8
-89 dBm @ MCS9
-86 dBm @ MCS10
-83 dBm @ MCS11
-80 dBm @ MCS12
-75 dBm @ MCS13
-74 dBm @ MCS14
-73 dBm @ MCS15
5 GHz
802.11n (HT40)
-90 dBm @ MCS0
-87 dBm @ MCS1
-85 dBm @ MCS2
-81 dBm @ MCS3
-78 dBm @ MCS4
-74 dBm @ MCS5
-72 dBm @ MCS6
-71 dBm @ MCS7
-90 dBm @ MCS8
-86 dBm @ MCS9
-84 dBm @ MCS10
-81 dBm @ MCS11
-78 dBm @ MCS12
-73 dBm @ MCS13
-72 dBm @ MCS14
-70 dBm @ MCS15
802.11ac (non HT80)
-88 dBm @ 6 Mbps
-70 dBm @ 54 Mbps
MCS Index Spatial Streams
VHT20 VHT40 VHT80 VHT20- STBC VHT40- STBC VHT80- STBC
0 1 -93 dBm -90 dBm -87 dBm -95 dBm -93 dBm -90 dBm
8 1 -69 dBm -72 dBm -68 dBm -65 dBm
9 1 -64 dBm -61 dBm
0 2 -92 dBm -89 dBm -86 dBm
8 2 -68 dBm
9 2 -63 dBm -60 dBm
Maximum transmit power 2.4 GHz
802.11b
◦ 17 dBm with 1 antenna
802.11g
◦ 20 dBm with 2 antennas
802.11n (HT20)
◦ 20 dBm with 2 antennas
5 GHz
802.11a
◦ 17 dBm with 1 antenna
802.11n non-HT duplicate mode
◦ 20 dBm with 2 antennas
802.11n (HT20)
◦ 20 dBm with 2 antennas
802.11n (HT40)
◦ 20 dBm with 2 antennas
802.11ac
◦ Non-HT80: 20 dBm with 2 antennas
◦ VHT20: 20 dBm with 2 antennas
◦ VHT40: 20 dBm with 2 antennas
◦ VHT80: 20 dBm, 2 antennas
◦ VHT20-STBC: 20 dBm with 2 antennas
◦ VHT40-STBC: 20 dBm with 2 antennas
◦ VHT80-STBC: 20 dBm with 2 antennas
Available transmit power settings 2.4 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
5 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78mW)
Integrated antennas 2.4 GHz, gain 2 dBi
5 GHz, gain 4 dBi
Interfaces One 10/100/1000BASE-T PoE uplink port
Management console port (RJ-45)
Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
◦ PoE out provides 802.3af when access point is powered by Cisco local power supply (AIR-PWR-C=, AIR-PWR- D=), or ~6.5W when powered by 802.3at, or no output when powered by 802.3af
One passive pass-through port RJ-45 (back to bottom)
DC power connector
Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Per-port status for local Ethernet ports
For privacy, LEDs are automatically turned off when the access point joins a controller. LEDs may be enabled to be administratively - see configuration guide.
Dimensions (W x L x H) Access point (without mounting bracket): 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm)
Weight Access point without mounting bracket or any other accessories: 1.2 lb (560 g)
Environmental Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) maximum altitude: 25°C, 15,000 ft (4,500m)
Operating temperature: 32° to 104°F (0° to 40°C)
Operating humidity: 10% to 90% percent (noncondensing)
Operating maximum altitude: 40°C, 9843 ft (3,000m)
System 512 MB DRAM
256 MB flash
1.4 GHz system dual-core CPU
Input power requirements 44 to 57V DC
Optional power supply and power injector: 100 to 240V AC; 49 to 60 Hz
Powering options 802.3af/at Ethernet switch
Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Optional Cisco local power supply (AIR-PWR-C= or AIR-PWR-D=)
Power draw Maximum values: 12.95W (15.4W with 100m of cable) with no PoE out, 20.7W (22W with 100m of cable) with
6.49W PoE out and 27.65W with 12.95W PoE out (when powered using AIR-PWR-C or AIR-PWR-D)
Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling on the uplink port and 100m of cabling on the PoE out port.
Physical security Torx security screw, included with the access point
Kensington security slot
Mounting Included with the access point: mounting bracket AIR-AP-BRACKET-W2, compatible to install to single gang junction box or multiple international standards
Optional:
◦ AIR-AP1810W-KIT=, spacer kit to mount the access point directly on a wall where standard junction boxes are not available
◦ AIR-OEAP1810-CRD=, cradle kit to mount the access point on a desk
Accessories Mounting bracket: AIR-AP-BRACKET-W2= (available as spare)
Spacer kit: AIR-AP1810W-KIT= (sold separately), includes spacer and RJ-45 jumper cable
Cradle kit: AIR-OEAP1810-CRD= (sold separately), includes back cover and RJ-45 jumper cable
Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 20 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
Cisco local power supply: AIR-PWR-D= (sold separately)
Warranty Limited Lifetime Hardware Warranty
Compliance Safety:
◦ UL 60950-1
◦ CAN/CSA-C22.2 No. 60950-1
◦ UL 2043
◦ IEC 60950-1
◦ EN 60950-1
Radio approvals:
◦ FCC Part 15.247, 15.407
◦ RSS-247 (Canada)
◦ EN 300.328, EN 301.893 (Europe)
◦ ARIB-STD 66 (Japan)
◦ ARIB-STD T71 (Japan)
◦ EMI and susceptibility (Class B)
◦ FCC Part 15.107 and 15.109
◦ ICES-003 (Canada)
◦ VCCI (Japan)
◦ EN 301.489-1 and -17 (Europe)
IEEE standards:
◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
◦ IEEE 802.11ac Draft 5
Security:
◦ 802.11i, WPA2, WPA
◦ 802.1X
◦ AES
Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS)
◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2
◦ EAP-Flexible Authentication via Secure Tunneling (FAST)
◦ PEAP v1 or EAP-Generic Token Card (GTC)
◦ EAP-Subscriber Identity Module (SIM)
Multimedia:
◦ Wi-Fi Multimedia (WMM)
Other:
◦ FCC Bulletin OET-65C
◦ RSS-102

INTERNATIONAL -

International buyers must acknowledge that all duties and taxes are their sole responsibility and Network Devices Inc is not held responsible for possible additional charges.

DOMESTIC -

Products are shipped Monday through Friday via UPS/FedEx/USPS. The estimated delivery time is 1-6 business days depending on location. If “Free Shipping” is offered, it will be by Ground only and within USA Continental States Only (48 States). There will be a surcharge on shipments to Hawaii, Alaska, Puerto Rico and APO/FPO addresses. After you have made a purchase, the surcharge will be calculated using the parcel’s weight and size. Network Devices Inc ships the product the same day of receiving an order. Otherwise you will a receive notification of delay or cancellation of said order.
 
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Checkout